binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / pcm058_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SYS_MALLOC_LEN=0x800000
5 CONFIG_SPL_GPIO=y
6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_ENV_SIZE=0x4000
10 CONFIG_ENV_OFFSET=0x100000
11 CONFIG_ENV_SECT_SIZE=0x10000
12 CONFIG_MX6Q=y
13 CONFIG_MX6_OCRAM_256KB=y
14 CONFIG_TARGET_PCM058=y
15 CONFIG_DM_GPIO=y
16 CONFIG_SPL_DM_SPI=y
17 CONFIG_DEFAULT_DEVICE_TREE="imx6q-phytec-mira-rdk-nand"
18 CONFIG_SPL_TEXT_BASE=0x00908000
19 CONFIG_SPL_MMC=y
20 CONFIG_SPL_SERIAL=y
21 CONFIG_SPL=y
22 CONFIG_ENV_OFFSET_REDUND=0x110000
23 CONFIG_SPL_LIBDISK_SUPPORT=y
24 CONFIG_SPL_SPI_FLASH_SUPPORT=y
25 CONFIG_SPL_SPI=y
26 CONFIG_CMD_HDMIDETECT=y
27 CONFIG_DISTRO_DEFAULTS=y
28 CONFIG_FIT=y
29 CONFIG_BOOTDELAY=3
30 CONFIG_BOOTCOMMAND="run mmcboot;run nandboot"
31 CONFIG_DISPLAY_BOARDINFO_LATE=y
32 CONFIG_SPL_BOARD_INIT=y
33 CONFIG_SPL_SEPARATE_BSS=y
34 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a
35 CONFIG_SPL_DMA=y
36 CONFIG_SPL_FS_EXT4=y
37 CONFIG_SPL_DM_SPI_FLASH=y
38 CONFIG_SPL_SPI_LOAD=y
39 CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400
40 CONFIG_SPL_WATCHDOG=y
41 CONFIG_SPL_YMODEM_SUPPORT=y
42 # CONFIG_CMD_FLASH is not set
43 CONFIG_CMD_GPIO=y
44 CONFIG_CMD_I2C=y
45 CONFIG_CMD_MMC=y
46 CONFIG_CMD_NAND_TRIMFFS=y
47 # CONFIG_CMD_PINMUX is not set
48 CONFIG_CMD_CACHE=y
49 CONFIG_CMD_EXT4_WRITE=y
50 CONFIG_CMD_MTDPARTS=y
51 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
52 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(rootfs)"
53 CONFIG_CMD_UBI=y
54 # CONFIG_SPL_PARTITION_UUIDS is not set
55 CONFIG_SPL_OF_CONTROL=y
56 CONFIG_ENV_OVERWRITE=y
57 CONFIG_ENV_IS_IN_SPI_FLASH=y
58 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
59 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
60 CONFIG_SPL_DM=y
61 CONFIG_BOUNCE_BUFFER=y
62 CONFIG_DM_I2C=y
63 CONFIG_SYS_I2C_MXC=y
64 CONFIG_FSL_USDHC=y
65 CONFIG_MTD=y
66 CONFIG_DM_MTD=y
67 CONFIG_MTD_RAW_NAND=y
68 CONFIG_SYS_NAND_USE_FLASH_BBT=y
69 CONFIG_NAND_MXS=y
70 CONFIG_NAND_MXS_DT=y
71 CONFIG_SYS_NAND_ONFI_DETECTION=y
72 CONFIG_DM_SPI_FLASH=y
73 CONFIG_SF_DEFAULT_SPEED=20000000
74 CONFIG_SPI_FLASH_STMICRO=y
75 CONFIG_PHYLIB=y
76 CONFIG_PHY_MICREL=y
77 CONFIG_PHY_MICREL_KSZ90X1=y
78 CONFIG_DM_ETH=y
79 CONFIG_DM_MDIO=y
80 CONFIG_FEC_MXC=y
81 CONFIG_MII=y
82 CONFIG_PINCTRL=y
83 CONFIG_PINCONF=y
84 # CONFIG_PINCONF_RECURSIVE is not set
85 CONFIG_SPL_PINCTRL=y
86 CONFIG_SPL_PINCONF=y
87 # CONFIG_SPL_PINCONF_RECURSIVE is not set
88 CONFIG_PINCTRL_IMX6=y
89 CONFIG_DM_SERIAL=y
90 CONFIG_MXC_UART=y
91 CONFIG_SPI=y
92 CONFIG_DM_SPI=y
93 CONFIG_MXC_SPI=y
94 # CONFIG_SPL_WDT is not set