configs/pcm052_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_THUMB_BUILD=y
   3 CONFIG_ARCH_VF610=y
   4 CONFIG_SYS_TEXT_BASE=0x3f401000
   5 CONFIG_NR_DRAM_BANKS=1
   6 CONFIG_TARGET_PCM052=y
   7 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
   8 CONFIG_BOOTDELAY=3
   9 CONFIG_BOARD_EARLY_INIT_F=y
  10 CONFIG_HUSH_PARSER=y
  11 CONFIG_CMD_BOOTZ=y
  12 CONFIG_CMD_MEMTEST=y
  13 CONFIG_CMD_GPIO=y
  14 CONFIG_CMD_I2C=y
  15 CONFIG_CMD_MMC=y
  16 CONFIG_CMD_NAND_TRIMFFS=y
  17 CONFIG_CMD_DHCP=y
  18 CONFIG_CMD_MII=y
  19 CONFIG_CMD_PING=y
  20 CONFIG_CMD_FAT=y
  21 CONFIG_MTDIDS_DEFAULT="nand0=NAND"
  22 CONFIG_MTDPARTS_DEFAULT="mtdparts=NAND:640k(bootloader),128k(env1),128k(env2),128k(dtb),6144k(kernel),-(root)"
  23 CONFIG_CMD_UBI=y
  24 CONFIG_OF_CONTROL=y
  25 CONFIG_DEFAULT_DEVICE_TREE="vf610-pcm052"
  26 CONFIG_ENV_IS_IN_NAND=y
  27 CONFIG_DM=y
  28 CONFIG_DM_GPIO=y
  29 CONFIG_VYBRID_GPIO=y
  30 CONFIG_DM_I2C=y
  31 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  32 CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
  33 CONFIG_SYS_I2C_MXC=y
  34 CONFIG_MISC=y
  35 CONFIG_I2C_EEPROM=y
  36 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
  37 CONFIG_SYS_I2C_EEPROM_BUS=2
  38 CONFIG_SYS_EEPROM_SIZE=32768
  39 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
  40 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
  41 CONFIG_DM_MMC=y
  42 CONFIG_FSL_ESDHC_IMX=y
  43 CONFIG_MTD=y
  44 CONFIG_NAND_VF610_NFC=y
  45 CONFIG_NAND_VF610_NFC_DT=y
  46 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
  47 CONFIG_DM_SPI_FLASH=y
  48 CONFIG_SPI_FLASH=y
  49 CONFIG_SPI_FLASH_STMICRO=y
  50 CONFIG_SPI_FLASH_MTD=y
  51 CONFIG_PHYLIB=y
  52 CONFIG_PHY_MICREL=y
  53 CONFIG_PHY_MICREL_KSZ8XXX=y
  54 CONFIG_DM_ETH=y
  55 CONFIG_FEC_MXC=y
  56 CONFIG_MII=y
  57 CONFIG_PINCTRL=y
  58 CONFIG_PINCTRL_VYBRID=y
  59 CONFIG_DM_RTC=y
  60 CONFIG_RTC_M41T62=y
  61 CONFIG_DM_SERIAL=y
  62 CONFIG_FSL_LPUART=y
  63 CONFIG_SPI=y
  64 CONFIG_DM_SPI=y
  65 CONFIG_FSL_QSPI=y
  66 # CONFIG_EFI_LOADER is not set