Merge git://git.denx.de/u-boot-mpc85xx
[platform/kernel/u-boot.git] / configs / pcm052_defconfig
1 CONFIG_ARM=y
2 CONFIG_SYS_THUMB_BUILD=y
3 CONFIG_ARCH_VF610=y
4 CONFIG_SYS_TEXT_BASE=0x3f401000
5 CONFIG_NR_DRAM_BANKS=1
6 CONFIG_TARGET_PCM052=y
7 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
8 CONFIG_BOOTDELAY=3
9 CONFIG_BOARD_EARLY_INIT_F=y
10 CONFIG_HUSH_PARSER=y
11 CONFIG_CMD_BOOTZ=y
12 CONFIG_CMD_MEMTEST=y
13 CONFIG_CMD_GPIO=y
14 CONFIG_CMD_I2C=y
15 CONFIG_CMD_MMC=y
16 CONFIG_CMD_NAND_TRIMFFS=y
17 CONFIG_CMD_DHCP=y
18 CONFIG_CMD_MII=y
19 CONFIG_CMD_PING=y
20 CONFIG_CMD_FAT=y
21 CONFIG_MTDIDS_DEFAULT="nand0=NAND"
22 CONFIG_MTDPARTS_DEFAULT="mtdparts=NAND:640k(bootloader),128k(env1),128k(env2),128k(dtb),6144k(kernel),-(root)"
23 CONFIG_CMD_UBI=y
24 CONFIG_OF_CONTROL=y
25 CONFIG_DEFAULT_DEVICE_TREE="vf610-pcm052"
26 CONFIG_ENV_IS_IN_NAND=y
27 CONFIG_DM=y
28 CONFIG_DM_GPIO=y
29 CONFIG_VYBRID_GPIO=y
30 CONFIG_DM_I2C=y
31 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
32 CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
33 CONFIG_SYS_I2C_MXC=y
34 CONFIG_SYS_I2C_MXC_I2C1=y
35 CONFIG_SYS_I2C_MXC_I2C2=y
36 CONFIG_SYS_I2C_MXC_I2C3=y
37 CONFIG_SYS_I2C_MXC_I2C4=y
38 CONFIG_MISC=y
39 CONFIG_I2C_EEPROM=y
40 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
41 CONFIG_SYS_I2C_EEPROM_BUS=2
42 CONFIG_SYS_EEPROM_SIZE=32768
43 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
44 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
45 CONFIG_DM_MMC=y
46 CONFIG_FSL_ESDHC=y
47 CONFIG_MTD=y
48 CONFIG_NAND_VF610_NFC=y
49 CONFIG_NAND_VF610_NFC_DT=y
50 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
51 CONFIG_DM_SPI_FLASH=y
52 CONFIG_SPI_FLASH=y
53 CONFIG_SPI_FLASH_STMICRO=y
54 CONFIG_SPI_FLASH_MTD=y
55 CONFIG_PHYLIB=y
56 CONFIG_PHY_MICREL=y
57 CONFIG_PHY_MICREL_KSZ8XXX=y
58 CONFIG_DM_ETH=y
59 CONFIG_FEC_MXC=y
60 CONFIG_MII=y
61 CONFIG_PINCTRL=y
62 CONFIG_PINCTRL_VYBRID=y
63 CONFIG_DM_RTC=y
64 CONFIG_RTC_M41T62=y
65 CONFIG_DM_SERIAL=y
66 CONFIG_FSL_LPUART=y
67 CONFIG_SPI=y
68 CONFIG_DM_SPI=y
69 CONFIG_FSL_QSPI=y
70 # CONFIG_EFI_LOADER is not set