configs/openrd_ultimate_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_SYS_DCACHE_OFF=y
   4 CONFIG_ARCH_CPU_INIT=y
   5 CONFIG_SYS_THUMB_BUILD=y
   6 CONFIG_ARCH_KIRKWOOD=y
   7 CONFIG_SYS_KWD_CONFIG="board/Marvell/openrd/kwbimage.cfg"
   8 CONFIG_SYS_TEXT_BASE=0x600000
   9 CONFIG_NR_DRAM_BANKS=2
  10 CONFIG_TARGET_OPENRD=y
  11 CONFIG_BOARD_IS_OPENRD_ULTIMATE=y
  12 CONFIG_ENV_SIZE=0x20000
  13 CONFIG_ENV_OFFSET=0x80000
  14 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate"
  15 CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
  16 # CONFIG_SYS_MALLOC_F is not set
  17 CONFIG_SYS_LOAD_ADDR=0x800000
  18 CONFIG_BOOTDELAY=3
  19 CONFIG_USE_BOOTCOMMAND=y
  20 CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ${x_bootcmd_usb}; bootm 0x6400000;"
  21 CONFIG_USE_PREBOOT=y
  22 CONFIG_LOGLEVEL=2
  23 # CONFIG_DISPLAY_BOARDINFO is not set
  24 CONFIG_RESET_PHY_R=y
  25 # CONFIG_CMD_FLASH is not set
  26 CONFIG_CMD_IDE=y
  27 CONFIG_CMD_MMC=y
  28 CONFIG_CMD_NAND=y
  29 CONFIG_CMD_USB=y
  30 # CONFIG_CMD_SETEXPR is not set
  31 CONFIG_CMD_DHCP=y
  32 CONFIG_CMD_MII=y
  33 CONFIG_CMD_PING=y
  34 CONFIG_CMD_EXT2=y
  35 CONFIG_CMD_FAT=y
  36 CONFIG_CMD_JFFS2=y
  37 CONFIG_CMD_MTDPARTS=y
  38 CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
  39 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
  40 CONFIG_CMD_UBI=y
  41 CONFIG_ISO_PARTITION=y
  42 CONFIG_OF_CONTROL=y
  43 CONFIG_ENV_OVERWRITE=y
  44 CONFIG_ENV_IS_IN_NAND=y
  45 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  46 CONFIG_NETCONSOLE=y
  47 CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
  48 CONFIG_DM=y
  49 CONFIG_SYS_ATA_STRIDE=4
  50 CONFIG_SYS_ATA_DATA_OFFSET=0x100
  51 CONFIG_SYS_ATA_REG_OFFSET=0x100
  52 CONFIG_SYS_ATA_ALT_OFFSET=0x100
  53 CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
  54 CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
  55 # CONFIG_MMC_HW_PARTITIONING is not set
  56 CONFIG_MTD=y
  57 CONFIG_MTD_RAW_NAND=y
  58 CONFIG_MVGBE=y
  59 CONFIG_MII=y
  60 CONFIG_SYS_NS16550=y
  61 CONFIG_USB=y
  62 CONFIG_USB_EHCI_HCD=y