pico-imx7d: Add SPL support
[platform/kernel/u-boot.git] / configs / omapl138_lcdk_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_DAVINCI=y
3 CONFIG_SYS_TEXT_BASE=0xc1080000
4 CONFIG_TARGET_OMAPL138_LCDK=y
5 CONFIG_SYS_DA850_PLL0_POSTDIV=0
6 CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003
7 CONFIG_TI_COMMON_CMD_OPTIONS=y
8 CONFIG_SPL_LIBCOMMON_SUPPORT=y
9 CONFIG_SPL_LIBGENERIC_SUPPORT=y
10 CONFIG_SPL_MMC_SUPPORT=y
11 CONFIG_SPL_SERIAL_SUPPORT=y
12 CONFIG_SPL=y
13 CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
14 CONFIG_BOOTDELAY=3
15 CONFIG_LOGLEVEL=3
16 CONFIG_VERSION_VARIABLE=y
17 # CONFIG_DISPLAY_CPUINFO is not set
18 CONFIG_BOARD_EARLY_INIT_F=y
19 CONFIG_SPL_BOARD_INIT=y
20 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
21 CONFIG_SPL_NAND_SUPPORT=y
22 CONFIG_HUSH_PARSER=y
23 CONFIG_CRC32_VERIFY=y
24 # CONFIG_CMD_EEPROM is not set
25 # CONFIG_CMD_FLASH is not set
26 # CONFIG_CMD_GPIO is not set
27 CONFIG_CMD_NAND=y
28 # CONFIG_CMD_SETEXPR is not set
29 CONFIG_CMD_DIAG=y
30 CONFIG_CMD_UBI=y
31 CONFIG_OF_CONTROL=y
32 CONFIG_ENV_IS_IN_NAND=y
33 CONFIG_NET_RANDOM_ETHADDR=y
34 CONFIG_DM=y
35 CONFIG_DM_I2C=y
36 CONFIG_DM_I2C_COMPAT=y
37 CONFIG_NAND=y
38 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
39 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
40 CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
41 CONFIG_SPL_NAND_SIMPLE=y
42 CONFIG_SPI_FLASH=y
43 CONFIG_SPI_FLASH_STMICRO=y
44 CONFIG_SPI_FLASH_WINBOND=y
45 CONFIG_DM_SERIAL=y
46 CONFIG_SYS_NS16550=y
47 CONFIG_SPI=y
48 CONFIG_DAVINCI_SPI=y