binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / mx7ulp_evk_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX7ULP=y
3 CONFIG_SYS_TEXT_BASE=0x67800000
4 CONFIG_SYS_MALLOC_LEN=0x800000
5 CONFIG_NR_DRAM_BANKS=1
6 CONFIG_SYS_MEMTEST_START=0x60000000
7 CONFIG_SYS_MEMTEST_END=0x9e000000
8 CONFIG_ENV_SIZE=0x2000
9 CONFIG_ENV_OFFSET=0xC0000
10 CONFIG_DM_GPIO=y
11 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
12 CONFIG_TARGET_MX7ULP_EVK=y
13 CONFIG_SYS_LOAD_ADDR=0x60800000
14 CONFIG_OF_BOARD_SETUP=y
15 CONFIG_USE_BOOTCOMMAND=y
16 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi"
17 CONFIG_BOARD_EARLY_INIT_F=y
18 CONFIG_HUSH_PARSER=y
19 CONFIG_CMD_BOOTZ=y
20 CONFIG_CMD_MEMTEST=y
21 CONFIG_CMD_FUSE=y
22 CONFIG_CMD_GPIO=y
23 CONFIG_CMD_I2C=y
24 CONFIG_CMD_MMC=y
25 CONFIG_CMD_CACHE=y
26 CONFIG_CMD_FAT=y
27 CONFIG_OF_CONTROL=y
28 CONFIG_ENV_OVERWRITE=y
29 CONFIG_ENV_IS_IN_MMC=y
30 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
31 # CONFIG_NET is not set
32 CONFIG_DM=y
33 CONFIG_BOUNCE_BUFFER=y
34 CONFIG_IMX_RGPIO2P=y
35 # CONFIG_MXC_GPIO is not set
36 CONFIG_DM_I2C=y
37 CONFIG_SYS_I2C_IMX_LPI2C=y
38 CONFIG_SUPPORT_EMMC_BOOT=y
39 CONFIG_FSL_USDHC=y
40 CONFIG_MTD=y
41 CONFIG_PINCTRL=y
42 CONFIG_PINCTRL_IMX7ULP=y
43 CONFIG_DM_REGULATOR=y
44 CONFIG_DM_REGULATOR_FIXED=y
45 CONFIG_DM_REGULATOR_GPIO=y
46 CONFIG_DM_SERIAL=y
47 CONFIG_FSL_LPUART=y