arm: mvebu: switch clearfog to use device-tree i2c and gpio
[platform/kernel/u-boot.git] / configs / mx6sxsabreauto_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x87800000
4 CONFIG_TARGET_MX6SXSABREAUTO=y
5 # CONFIG_CMD_BMODE is not set
6 CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sabreauto"
7 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg"
8 CONFIG_SUPPORT_RAW_INITRD=y
9 CONFIG_HUSH_PARSER=y
10 CONFIG_CMD_BOOTZ=y
11 # CONFIG_CMD_FLASH is not set
12 CONFIG_CMD_GPIO=y
13 CONFIG_CMD_I2C=y
14 CONFIG_CMD_MMC=y
15 CONFIG_CMD_NAND_TRIMFFS=y
16 CONFIG_CMD_SF=y
17 CONFIG_CMD_USB=y
18 # CONFIG_CMD_SETEXPR is not set
19 CONFIG_CMD_DHCP=y
20 CONFIG_CMD_MII=y
21 CONFIG_CMD_PING=y
22 CONFIG_CMD_CACHE=y
23 CONFIG_CMD_TIME=y
24 CONFIG_CMD_REGULATOR=y
25 CONFIG_CMD_EXT2=y
26 CONFIG_CMD_EXT4=y
27 CONFIG_CMD_EXT4_WRITE=y
28 CONFIG_CMD_FAT=y
29 CONFIG_CMD_FS_GENERIC=y
30 CONFIG_OF_CONTROL=y
31 CONFIG_DM_GPIO=y
32 CONFIG_DM_PCA953X=y
33 CONFIG_DM_I2C=y
34 CONFIG_DM_MMC=y
35 CONFIG_FSL_ESDHC=y
36 CONFIG_NAND=y
37 CONFIG_NAND_MXS=y
38 CONFIG_SPI_FLASH=y
39 CONFIG_SPI_FLASH_BAR=y
40 CONFIG_SPI_FLASH_STMICRO=y
41 CONFIG_PHYLIB=y
42 CONFIG_PINCTRL=y
43 CONFIG_PINCTRL_IMX6=y
44 CONFIG_DM_PMIC=y
45 CONFIG_DM_PMIC_PFUZE100=y
46 CONFIG_DM_REGULATOR=y
47 CONFIG_DM_REGULATOR_PFUZE100=y
48 CONFIG_DM_REGULATOR_FIXED=y
49 CONFIG_DM_REGULATOR_GPIO=y
50 CONFIG_SPI=y
51 CONFIG_FSL_QSPI=y
52 CONFIG_USB=y
53 CONFIG_DM_USB=y
54 CONFIG_USB_STORAGE=y
55 CONFIG_USB_HOST_ETHER=y
56 CONFIG_USB_ETHER_ASIX=y