travis: Install pyelftools via pip
[platform/kernel/u-boot.git] / configs / mx6sllevk_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x87800000
4 CONFIG_ENV_SIZE=0x2000
5 CONFIG_ENV_OFFSET=0xC0000
6 CONFIG_TARGET_MX6SLLEVK=y
7 CONFIG_DM_GPIO=y
8 CONFIG_NR_DRAM_BANKS=1
9 # CONFIG_CMD_BMODE is not set
10 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sllevk/imximage.cfg"
11 CONFIG_SUPPORT_RAW_INITRD=y
12 CONFIG_BOUNCE_BUFFER=y
13 CONFIG_BOARD_EARLY_INIT_F=y
14 CONFIG_HUSH_PARSER=y
15 CONFIG_CMD_BOOTZ=y
16 CONFIG_CMD_MEMTEST=y
17 CONFIG_SYS_MEMTEST_START=0x80000000
18 CONFIG_SYS_MEMTEST_END=0x88000000
19 CONFIG_CMD_GPIO=y
20 CONFIG_CMD_I2C=y
21 CONFIG_CMD_MMC=y
22 CONFIG_CMD_USB=y
23 CONFIG_CMD_DHCP=y
24 CONFIG_CMD_PING=y
25 CONFIG_CMD_CACHE=y
26 CONFIG_CMD_REGULATOR=y
27 CONFIG_CMD_EXT2=y
28 CONFIG_CMD_EXT4=y
29 CONFIG_CMD_EXT4_WRITE=y
30 CONFIG_CMD_FAT=y
31 CONFIG_CMD_FS_GENERIC=y
32 CONFIG_OF_CONTROL=y
33 CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk"
34 CONFIG_ENV_IS_IN_MMC=y
35 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
36 CONFIG_DM_I2C=y
37 CONFIG_DM_MMC=y
38 CONFIG_FSL_USDHC=y
39 CONFIG_MTD=y
40 CONFIG_PINCTRL=y
41 CONFIG_PINCTRL_IMX6=y
42 CONFIG_DM_PMIC=y
43 CONFIG_DM_PMIC_PFUZE100=y
44 CONFIG_DM_REGULATOR=y
45 CONFIG_DM_REGULATOR_PFUZE100=y
46 CONFIG_DM_REGULATOR_FIXED=y
47 CONFIG_DM_REGULATOR_GPIO=y
48 CONFIG_MXC_UART=y
49 CONFIG_USB=y
50 CONFIG_DM_USB=y
51 CONFIG_USB_STORAGE=y
52 CONFIG_USB_HOST_ETHER=y
53 CONFIG_USB_ETHER_ASIX=y
54 CONFIG_USB_ETHER_RTL8152=y