ls1046ardb_qspi*: Enable RAMBOOT_PBL
[platform/kernel/u-boot.git] / configs / mx6slevk_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x87800000
4 CONFIG_NR_DRAM_BANKS=1
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0x80000
7 CONFIG_MX6SL=y
8 CONFIG_TARGET_MX6SLEVK=y
9 CONFIG_DM_GPIO=y
10 CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
11 # CONFIG_CMD_BMODE is not set
12 CONFIG_SUPPORT_RAW_INITRD=y
13 CONFIG_BOARD_EARLY_INIT_F=y
14 CONFIG_HUSH_PARSER=y
15 CONFIG_CMD_BOOTZ=y
16 # CONFIG_CMD_FLASH is not set
17 CONFIG_CMD_GPIO=y
18 CONFIG_CMD_I2C=y
19 CONFIG_CMD_MMC=y
20 CONFIG_CMD_PART=y
21 CONFIG_CMD_USB=y
22 # CONFIG_CMD_SETEXPR is not set
23 CONFIG_CMD_DHCP=y
24 CONFIG_CMD_MII=y
25 CONFIG_CMD_PING=y
26 CONFIG_CMD_CACHE=y
27 CONFIG_CMD_EXT2=y
28 CONFIG_CMD_EXT4=y
29 CONFIG_CMD_EXT4_WRITE=y
30 CONFIG_CMD_FAT=y
31 CONFIG_CMD_FS_GENERIC=y
32 CONFIG_OF_CONTROL=y
33 CONFIG_ENV_OVERWRITE=y
34 CONFIG_ENV_IS_IN_MMC=y
35 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
36 CONFIG_SYS_MMC_ENV_DEV=1
37 CONFIG_DM=y
38 CONFIG_BOUNCE_BUFFER=y
39 CONFIG_DM_I2C=y
40 CONFIG_SYS_I2C_MXC=y
41 CONFIG_FSL_USDHC=y
42 CONFIG_MTD=y
43 CONFIG_DM_SPI_FLASH=y
44 CONFIG_SF_DEFAULT_MODE=0
45 CONFIG_SF_DEFAULT_SPEED=20000000
46 CONFIG_SPI_FLASH_STMICRO=y
47 CONFIG_PHYLIB=y
48 CONFIG_PHY_SMSC=y
49 CONFIG_DM_ETH=y
50 CONFIG_FEC_MXC=y
51 CONFIG_MII=y
52 CONFIG_PINCTRL=y
53 CONFIG_PINCTRL_IMX6=y
54 CONFIG_DM_PMIC=y
55 CONFIG_DM_PMIC_PFUZE100=y
56 CONFIG_DM_REGULATOR=y
57 CONFIG_DM_REGULATOR_PFUZE100=y
58 CONFIG_DM_REGULATOR_FIXED=y
59 CONFIG_DM_REGULATOR_GPIO=y
60 CONFIG_MXC_UART=y
61 CONFIG_SPI=y
62 CONFIG_DM_SPI=y
63 CONFIG_MXC_SPI=y
64 CONFIG_DM_THERMAL=y
65 CONFIG_IMX_THERMAL=y
66 CONFIG_USB=y
67 CONFIG_USB_STORAGE=y
68 CONFIG_USB_HOST_ETHER=y
69 CONFIG_USB_ETHER_ASIX=y