configs: Enable USB3 on Allwinner H6 boards
[platform/kernel/u-boot.git] / configs / meerkat96_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX7=y
3 CONFIG_SYS_MALLOC_F_LEN=0x4000
4 CONFIG_NR_DRAM_BANKS=1
5 CONFIG_SYS_MEMTEST_START=0x80000000
6 CONFIG_SYS_MEMTEST_END=0xa0000000
7 CONFIG_ENV_SIZE=0x2000
8 CONFIG_ENV_OFFSET=0x80000
9 CONFIG_DM_GPIO=y
10 CONFIG_DEFAULT_DEVICE_TREE="imx7d-meerkat96"
11 CONFIG_TARGET_MEERKAT96=y
12 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
13 # CONFIG_ARMV7_VIRT is not set
14 CONFIG_IMX_RDC=y
15 CONFIG_IMX_BOOTAUX=y
16 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/novtech/meerkat96/imximage.cfg"
17 CONFIG_HUSH_PARSER=y
18 # CONFIG_CMD_BOOTD is not set
19 CONFIG_CMD_BOOTZ=y
20 # CONFIG_CMD_IMI is not set
21 # CONFIG_CMD_XIMG is not set
22 CONFIG_CMD_MEMTEST=y
23 CONFIG_CMD_GPIO=y
24 CONFIG_CMD_MMC=y
25 CONFIG_CMD_PART=y
26 CONFIG_CMD_USB=y
27 CONFIG_CMD_DHCP=y
28 CONFIG_CMD_CACHE=y
29 CONFIG_CMD_EXT2=y
30 CONFIG_CMD_EXT4=y
31 CONFIG_CMD_EXT4_WRITE=y
32 CONFIG_CMD_FAT=y
33 CONFIG_CMD_FS_GENERIC=y
34 CONFIG_OF_CONTROL=y
35 CONFIG_ENV_OVERWRITE=y
36 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
37 CONFIG_NET_RANDOM_ETHADDR=y
38 CONFIG_BOUNCE_BUFFER=y
39 CONFIG_MMC_BROKEN_CD=y
40 CONFIG_FSL_USDHC=y
41 CONFIG_MTD=y
42 CONFIG_PINCTRL=y
43 CONFIG_PINCTRL_IMX7=y
44 CONFIG_DM_PMIC=y
45 CONFIG_DM_REGULATOR=y
46 CONFIG_DM_REGULATOR_FIXED=y
47 CONFIG_DM_REGULATOR_GPIO=y
48 CONFIG_MXC_UART=y
49 CONFIG_USB=y
50 CONFIG_USB_EHCI_HCD=y
51 CONFIG_MXC_USB_OTG_HACTIVE=y
52 CONFIG_USB_HOST_ETHER=y
53 CONFIG_USB_ETHER_ASIX=y
54 CONFIG_USB_ETHER_ASIX88179=y
55 CONFIG_USB_ETHER_MCS7830=y
56 CONFIG_USB_ETHER_RTL8152=y
57 CONFIG_USB_ETHER_SMSC95XX=y