vbe: Support selecting operations by SPL phase
[platform/kernel/u-boot.git] / configs / medcom-wide_defconfig
1 CONFIG_ARM=y
2 CONFIG_SYS_L2CACHE_OFF=y
3 CONFIG_ARCH_TEGRA=y
4 CONFIG_TEXT_BASE=0x00110000
5 CONFIG_NR_DRAM_BANKS=2
6 CONFIG_ENV_SIZE=0x2000
7 CONFIG_ENV_OFFSET=0x1FFE0000
8 CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide"
9 CONFIG_SPL_TEXT_BASE=0x00108000
10 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # "
11 CONFIG_TEGRA20=y
12 CONFIG_TARGET_MEDCOM_WIDE=y
13 CONFIG_SYS_LOAD_ADDR=0x1000000
14 CONFIG_FIT=y
15 CONFIG_OF_SYSTEM_SETUP=y
16 CONFIG_SYS_STDIO_DEREGISTER=y
17 CONFIG_SPL_FOOTPRINT_LIMIT=y
18 CONFIG_SPL_MAX_FOOTPRINT=0x8000
19 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
20 CONFIG_SPL_STACK=0xffffc
21 CONFIG_SYS_SPL_MALLOC=y
22 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
23 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000
24 CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
25 CONFIG_SYS_MAXARGS=64
26 CONFIG_SYS_PBSIZE=2089
27 # CONFIG_CMD_IMI is not set
28 # CONFIG_CMD_FLASH is not set
29 CONFIG_CMD_GPIO=y
30 CONFIG_CMD_MMC=y
31 CONFIG_CMD_USB=y
32 # CONFIG_CMD_SETEXPR is not set
33 # CONFIG_CMD_NFS is not set
34 CONFIG_CMD_PMIC=y
35 CONFIG_CMD_REGULATOR=y
36 CONFIG_CMD_EXT4_WRITE=y
37 # CONFIG_SPL_DOS_PARTITION is not set
38 # CONFIG_SPL_EFI_PARTITION is not set
39 CONFIG_ENV_OVERWRITE=y
40 CONFIG_ENV_IS_IN_NAND=y
41 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
42 CONFIG_SPL_DM=y
43 CONFIG_MTD=y
44 CONFIG_MTD_RAW_NAND=y
45 CONFIG_TEGRA_NAND=y
46 CONFIG_SYS_NAND_ONFI_DETECTION=y
47 CONFIG_DM_PMIC=y
48 CONFIG_DM_REGULATOR=y
49 CONFIG_DM_REGULATOR_FIXED=y
50 CONFIG_PWM_TEGRA=y
51 CONFIG_SYS_NS16550=y
52 CONFIG_USB=y
53 CONFIG_USB_EHCI_HCD=y
54 CONFIG_USB_EHCI_TEGRA=y
55 CONFIG_USB_HOST_ETHER=y
56 CONFIG_USB_ETHER_SMSC95XX=y
57 CONFIG_VIDEO=y
58 # CONFIG_VIDEO_BPP8 is not set
59 CONFIG_VIDEO_TEGRA20=y