configs: ls1021a-tsn: enable sja1105 switch driver
[platform/kernel/u-boot.git] / configs / medcom-wide_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_TEGRA=y
3 CONFIG_SYS_TEXT_BASE=0x00110000
4 CONFIG_NR_DRAM_BANKS=2
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0x1FFE0000
7 CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide"
8 CONFIG_SPL_TEXT_BASE=0x00108000
9 CONFIG_TEGRA20=y
10 CONFIG_TARGET_MEDCOM_WIDE=y
11 CONFIG_SYS_LOAD_ADDR=0x1000000
12 CONFIG_FIT=y
13 CONFIG_OF_SYSTEM_SETUP=y
14 CONFIG_SYS_STDIO_DEREGISTER=y
15 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # "
16 # CONFIG_CMD_IMI is not set
17 # CONFIG_CMD_FLASH is not set
18 CONFIG_CMD_GPIO=y
19 CONFIG_CMD_MMC=y
20 CONFIG_CMD_NAND=y
21 CONFIG_CMD_USB=y
22 # CONFIG_CMD_SETEXPR is not set
23 # CONFIG_CMD_NFS is not set
24 CONFIG_CMD_PMIC=y
25 CONFIG_CMD_REGULATOR=y
26 CONFIG_CMD_EXT4_WRITE=y
27 # CONFIG_SPL_DOS_PARTITION is not set
28 # CONFIG_SPL_EFI_PARTITION is not set
29 CONFIG_ENV_OVERWRITE=y
30 CONFIG_ENV_IS_IN_NAND=y
31 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
32 CONFIG_SPL_DM=y
33 CONFIG_MTD=y
34 CONFIG_MTD_RAW_NAND=y
35 CONFIG_SYS_NAND_ONFI_DETECTION=y
36 CONFIG_DM_PMIC=y
37 CONFIG_DM_REGULATOR=y
38 CONFIG_DM_REGULATOR_FIXED=y
39 CONFIG_PWM_TEGRA=y
40 CONFIG_SYS_NS16550=y
41 CONFIG_USB=y
42 CONFIG_USB_EHCI_HCD=y
43 CONFIG_USB_EHCI_TEGRA=y
44 CONFIG_USB_HOST_ETHER=y
45 CONFIG_USB_ETHER_SMSC95XX=y
46 CONFIG_DM_VIDEO=y
47 # CONFIG_VIDEO_BPP8 is not set
48 CONFIG_VIDEO_TEGRA20=y