davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
[platform/kernel/u-boot.git] / configs / mccmon6_sd_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_TARGET_MCCMON6=y
7 CONFIG_SPL_MMC_SUPPORT=y
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_NR_DRAM_BANKS=1
10 CONFIG_SPL=y
11 # CONFIG_CMD_BMODE is not set
12 CONFIG_DISTRO_DEFAULTS=y
13 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
14 # CONFIG_USE_BOOTCOMMAND is not set
15 CONFIG_BOUNCE_BUFFER=y
16 CONFIG_SPL_TEXT_BASE=0x00908000
17 CONFIG_SPL_BOARD_INIT=y
18 CONFIG_SPL_ENV_SUPPORT=y
19 CONFIG_SPL_NOR_SUPPORT=y
20 CONFIG_CMD_GPIO=y
21 CONFIG_CMD_I2C=y
22 CONFIG_CMD_MMC=y
23 CONFIG_CMD_SF=y
24 CONFIG_CMD_CACHE=y
25 CONFIG_CMD_EXT4_WRITE=y
26 CONFIG_CMD_MTDPARTS=y
27 CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
28 CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor),128k@0x1980000(kernel-dtb.nor),128k@0x19C0000(swupdate-kernel-dtb.nor)"
29 CONFIG_ENV_IS_IN_FLASH=y
30 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
31 CONFIG_DM=y
32 CONFIG_FSL_ESDHC_IMX=y
33 CONFIG_MTD=y
34 CONFIG_MTD_NOR_FLASH=y
35 CONFIG_MTD_DEVICE=y
36 CONFIG_FLASH_CFI_DRIVER=y
37 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
38 CONFIG_FLASH_CFI_MTD=y
39 CONFIG_SYS_FLASH_PROTECTION=y
40 CONFIG_SYS_FLASH_CFI=y
41 CONFIG_SPI_FLASH=y
42 CONFIG_SF_DEFAULT_BUS=2
43 CONFIG_SF_DEFAULT_MODE=0
44 CONFIG_SF_DEFAULT_SPEED=25000000
45 CONFIG_SPI_FLASH_SPANSION=y
46 CONFIG_PHYLIB=y
47 CONFIG_PHY_MICREL=y
48 CONFIG_PHY_MICREL_KSZ90X1=y
49 CONFIG_MII=y
50 CONFIG_SPI=y
51 CONFIG_MXC_SPI=y
52 CONFIG_DM_THERMAL=y
53 CONFIG_OF_LIBFDT=y