2 CONFIG_COUNTER_FREQUENCY=25000000
4 CONFIG_TARGET_LS2080AQDS=y
5 CONFIG_SYS_TEXT_BASE=0x30100000
6 CONFIG_SYS_MALLOC_LEN=0x202000
9 CONFIG_ENV_SECT_SIZE=0x20000
10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
12 CONFIG_ENV_ADDR=0x80300000
14 CONFIG_FSL_USE_PCA9547_MUX=y
16 # CONFIG_QIXIS_I2C_ACCESS is not set
17 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
18 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
19 # CONFIG_SYS_MALLOC_F is not set
23 CONFIG_OF_BOARD_SETUP=y
24 CONFIG_OF_STDOUT_VIA_ALIAS=y
25 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
28 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
29 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
36 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
37 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
44 # CONFIG_CMD_SETEXPR is not set
47 # CONFIG_ISO_PARTITION is not set
49 CONFIG_ENV_OVERWRITE=y
50 CONFIG_ENV_IS_IN_FLASH=y
52 CONFIG_ETHPRIME="DPMAC1@xgmii"
53 CONFIG_NET_RANDOM_ETHADDR=y
58 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
59 CONFIG_DIMM_SLOTS_PER_CTLR=2
61 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
62 CONFIG_SYS_FSL_DDR_INTLV_256B=y
63 CONFIG_SYS_I2C_LEGACY=y
64 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
66 CONFIG_ESDHC_DETECT_QUIRK=y
68 CONFIG_MTD_NOR_FLASH=y
69 CONFIG_FLASH_CFI_DRIVER=y
70 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
71 CONFIG_SYS_FLASH_EMPTY_INFO=y
72 CONFIG_SYS_FLASH_CFI=y
73 CONFIG_SYS_FLASH_QUIET_TEST=y
74 CONFIG_SYS_MAX_FLASH_SECT=1024
75 CONFIG_SYS_MAX_FLASH_BANKS=2
78 CONFIG_SYS_NAND_ONFI_DETECTION=y
80 CONFIG_SPI_FLASH_EON=y
81 CONFIG_SPI_FLASH_STMICRO=y
82 CONFIG_SPI_FLASH_SST=y
86 CONFIG_PHY_TERANETICS=y
89 CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
95 CONFIG_DM_PCI_COMPAT=y
96 CONFIG_PCIE_LAYERSCAPE_RC=y
97 CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y
104 CONFIG_USB_XHCI_HCD=y
105 CONFIG_USB_XHCI_DWC3=y