sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG
[platform/kernel/u-boot.git] / configs / ls1046ardb_tfa_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_TFABOOT=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_SECT_SIZE=0x40000
7 CONFIG_ENV_OFFSET=0x500000
8 CONFIG_QSPI_AHB_INIT=y
9 CONFIG_NR_DRAM_BANKS=2
10 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
11 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
12 CONFIG_AHCI=y
13 CONFIG_DISTRO_DEFAULTS=y
14 CONFIG_FIT_VERBOSE=y
15 CONFIG_OF_BOARD_SETUP=y
16 CONFIG_BOOTDELAY=10
17 CONFIG_USE_BOOTARGS=y
18 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
19 CONFIG_MISC_INIT_R=y
20 CONFIG_CMD_GPT=y
21 CONFIG_CMD_I2C=y
22 CONFIG_CMD_MMC=y
23 CONFIG_CMD_NAND=y
24 CONFIG_CMD_PCI=y
25 CONFIG_CMD_USB=y
26 CONFIG_CMD_CACHE=y
27 CONFIG_MP=y
28 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
29 CONFIG_OF_CONTROL=y
30 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
31 CONFIG_ENV_IS_IN_MMC=y
32 CONFIG_ENV_IS_IN_SPI_FLASH=y
33 CONFIG_ENV_ADDR=0x40500000
34 CONFIG_DM=y
35 CONFIG_SATA_CEVA=y
36 CONFIG_FSL_CAAM=y
37 CONFIG_DM_MMC=y
38 CONFIG_FSL_ESDHC=y
39 CONFIG_MTD=y
40 CONFIG_MTD_RAW_NAND=y
41 # CONFIG_SPI_FLASH_BAR is not set
42 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
43 CONFIG_PHYLIB=y
44 CONFIG_PHY_AQUANTIA=y
45 CONFIG_E1000=y
46 CONFIG_FMAN_ENET=y
47 CONFIG_PCI=y
48 CONFIG_DM_PCI=y
49 CONFIG_DM_PCI_COMPAT=y
50 CONFIG_PCIE_LAYERSCAPE=y
51 CONFIG_DM_SCSI=y
52 CONFIG_SYS_NS16550=y
53 CONFIG_SPI=y
54 CONFIG_DM_SPI=y
55 CONFIG_FSL_QSPI=y
56 CONFIG_USB=y
57 CONFIG_DM_USB=y
58 CONFIG_USB_XHCI_HCD=y
59 CONFIG_USB_XHCI_DWC3=y
60 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
61 CONFIG_DM_I2C=y
62 CONFIG_DM_GPIO=y