2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_SPL_MMC_SUPPORT=y
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10 CONFIG_NR_DRAM_BANKS=2
13 CONFIG_SPL_TEXT_BASE=0x10000000
14 CONFIG_DISTRO_DEFAULTS=y
16 CONFIG_OF_BOARD_SETUP=y
17 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
21 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
23 CONFIG_SPL_BOARD_INIT=y
24 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
25 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
26 CONFIG_SPL_ENV_SUPPORT=y
27 CONFIG_SPL_I2C_SUPPORT=y
28 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
29 CONFIG_SPL_WATCHDOG_SUPPORT=y
39 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
40 # CONFIG_SPL_EFI_PARTITION is not set
42 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
43 CONFIG_ENV_IS_IN_MMC=y
50 # CONFIG_SPI_FLASH_BAR is not set
51 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
58 CONFIG_DM_PCI_COMPAT=y
59 CONFIG_PCIE_LAYERSCAPE=y
60 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
69 CONFIG_USB_XHCI_DWC3=y
70 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y