configs: stm32h743-evaluation: Add DISTRO_DEFAULT support
[platform/kernel/u-boot.git] / configs / ls1046ardb_sdcard_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_FSL_LS_PPA=y
7 CONFIG_SPL_MMC_SUPPORT=y
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10 CONFIG_SPL=y
11 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
12 CONFIG_DISTRO_DEFAULTS=y
13 CONFIG_FIT_VERBOSE=y
14 CONFIG_OF_BOARD_SETUP=y
15 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL"
16 CONFIG_SD_BOOT=y
17 CONFIG_BOOTDELAY=10
18 CONFIG_USE_BOOTARGS=y
19 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
20 CONFIG_SPL_BOARD_INIT=y
21 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
22 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
23 CONFIG_SPL_ENV_SUPPORT=y
24 CONFIG_SPL_I2C_SUPPORT=y
25 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
26 CONFIG_SPL_WATCHDOG_SUPPORT=y
27 CONFIG_CMD_GPT=y
28 CONFIG_CMD_I2C=y
29 CONFIG_CMD_MMC=y
30 CONFIG_CMD_NAND=y
31 CONFIG_CMD_PCI=y
32 CONFIG_CMD_SF=y
33 CONFIG_CMD_USB=y
34 CONFIG_CMD_CACHE=y
35 CONFIG_MP=y
36 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
37 # CONFIG_SPL_EFI_PARTITION is not set
38 CONFIG_OF_CONTROL=y
39 CONFIG_ENV_IS_IN_MMC=y
40 CONFIG_DM=y
41 CONFIG_FSL_CAAM=y
42 CONFIG_FSL_ESDHC=y
43 CONFIG_SPI_FLASH=y
44 CONFIG_PHYLIB=y
45 CONFIG_NETDEVICES=y
46 CONFIG_PHY_GIGE=y
47 CONFIG_E1000=y
48 CONFIG_PCI=y
49 CONFIG_DM_PCI=y
50 CONFIG_DM_PCI_COMPAT=y
51 CONFIG_PCIE_LAYERSCAPE=y
52 CONFIG_SYS_NS16550=y
53 CONFIG_SPI=y
54 CONFIG_DM_SPI=y
55 CONFIG_FSL_QSPI=y
56 CONFIG_USB=y
57 CONFIG_DM_USB=y
58 CONFIG_USB_XHCI_HCD=y
59 CONFIG_USB_XHCI_DWC3=y
60 CONFIG_USB_STORAGE=y