2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SYS_MALLOC_LEN=0x102000
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
9 CONFIG_ENV_OFFSET=0x300000
10 CONFIG_SYS_I2C_MXC_I2C1=y
11 CONFIG_SYS_I2C_MXC_I2C2=y
12 CONFIG_SYS_I2C_MXC_I2C3=y
13 CONFIG_SYS_I2C_MXC_I2C4=y
15 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
16 CONFIG_SPL_TEXT_BASE=0x10000000
20 CONFIG_SPL_DRIVERS_MISC=y
23 CONFIG_DISTRO_DEFAULTS=y
25 CONFIG_OF_BOARD_SETUP=y
27 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg"
28 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg"
32 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
35 CONFIG_SPL_BOARD_INIT=y
36 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
37 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
38 CONFIG_SPL_ENV_SUPPORT=y
40 CONFIG_SPL_MPC8XXX_INIT_DDR=y
42 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
53 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
54 # CONFIG_SPL_EFI_PARTITION is not set
56 CONFIG_ENV_OVERWRITE=y
57 CONFIG_ENV_IS_IN_MMC=y
58 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
63 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
65 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
66 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
71 CONFIG_SYS_NAND_ONFI_DETECTION=y
72 # CONFIG_SPI_FLASH_BAR is not set
73 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
82 CONFIG_SYS_FMAN_FW_ADDR=0x900000
85 CONFIG_PCIE_LAYERSCAPE_RC=y
86 CONFIG_PCIE_LAYERSCAPE_EP=y
89 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
97 CONFIG_USB_XHCI_DWC3=y
98 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y