configs/ls1046ardb_qspi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_COUNTER_FREQUENCY=25000000
   3 CONFIG_TARGET_LS1046ARDB=y
   4 CONFIG_SYS_TEXT_BASE=0x40100000
   5 CONFIG_SYS_MALLOC_LEN=0x102000
   6 CONFIG_NR_DRAM_BANKS=2
   7 CONFIG_ENV_SIZE=0x2000
   8 CONFIG_ENV_OFFSET=0x300000
   9 CONFIG_ENV_SECT_SIZE=0x40000
  10 CONFIG_SYS_I2C_MXC_I2C1=y
  11 CONFIG_SYS_I2C_MXC_I2C2=y
  12 CONFIG_SYS_I2C_MXC_I2C3=y
  13 CONFIG_SYS_I2C_MXC_I2C4=y
  14 CONFIG_DM_GPIO=y
  15 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
  16 CONFIG_FSL_LS_PPA=y
  17 CONFIG_QSPI_AHB_INIT=y
  18 CONFIG_ENV_ADDR=0x40300000
  19 CONFIG_AHCI=y
  20 CONFIG_LAYERSCAPE_NS_ACCESS=y
  21 CONFIG_PCIE1=y
  22 CONFIG_PCIE2=y
  23 CONFIG_PCIE3=y
  24 CONFIG_DISTRO_DEFAULTS=y
  25 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  26 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
  27 CONFIG_REMAKE_ELF=y
  28 CONFIG_MP=y
  29 CONFIG_FIT_VERBOSE=y
  30 CONFIG_OF_BOARD_SETUP=y
  31 CONFIG_RAMBOOT_PBL=y
  32 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg"
  33 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg"
  34 CONFIG_QSPI_BOOT=y
  35 CONFIG_BOOTDELAY=10
  36 CONFIG_USE_BOOTARGS=y
  37 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  38 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;"
  39 CONFIG_ARCH_MISC_INIT=y
  40 CONFIG_MISC_INIT_R=y
  41 CONFIG_SYS_MAXARGS=64
  42 CONFIG_SYS_PBSIZE=532
  43 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  44 CONFIG_CMD_DM=y
  45 CONFIG_CMD_GPIO=y
  46 CONFIG_CMD_GPT=y
  47 CONFIG_CMD_I2C=y
  48 CONFIG_CMD_MMC=y
  49 CONFIG_CMD_NAND=y
  50 CONFIG_CMD_PCI=y
  51 CONFIG_CMD_USB=y
  52 CONFIG_CMD_CACHE=y
  53 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  54 CONFIG_OF_CONTROL=y
  55 CONFIG_ENV_OVERWRITE=y
  56 CONFIG_ENV_IS_IN_SPI_FLASH=y
  57 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  58 CONFIG_USE_ETHPRIME=y
  59 CONFIG_ETHPRIME="FM1@DTSEC3"
  60 CONFIG_DM=y
  61 CONFIG_SATA=y
  62 CONFIG_SATA_CEVA=y
  63 CONFIG_FSL_CAAM=y
  64 CONFIG_DDR_ECC=y
  65 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
  66 CONFIG_MPC8XXX_GPIO=y
  67 CONFIG_DM_I2C=y
  68 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  69 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
  70 CONFIG_FSL_ESDHC=y
  71 CONFIG_MTD=y
  72 CONFIG_MTD_RAW_NAND=y
  73 CONFIG_NAND_FSL_IFC=y
  74 CONFIG_SYS_NAND_ONFI_DETECTION=y
  75 # CONFIG_SPI_FLASH_BAR is not set
  76 CONFIG_SPI_FLASH_SPANSION=y
  77 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  78 CONFIG_PHYLIB=y
  79 CONFIG_PHY_AQUANTIA=y
  80 CONFIG_PHY_REALTEK=y
  81 CONFIG_PHY_FIXED=y
  82 CONFIG_DM_ETH=y
  83 CONFIG_DM_MDIO=y
  84 CONFIG_E1000=y
  85 CONFIG_FMAN_ENET=y
  86 CONFIG_SYS_FMAN_FW_ADDR=0x40900000
  87 CONFIG_NVME_PCI=y
  88 CONFIG_PCI=y
  89 CONFIG_PCIE_LAYERSCAPE_RC=y
  90 CONFIG_PCIE_LAYERSCAPE_EP=y
  91 CONFIG_POWER_LEGACY=y
  92 CONFIG_POWER_I2C=y
  93 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
  94 CONFIG_DM_SCSI=y
  95 CONFIG_SYS_NS16550=y
  96 CONFIG_SPI=y
  97 CONFIG_DM_SPI=y
  98 CONFIG_FSL_QSPI=y
  99 CONFIG_USB=y
 100 CONFIG_USB_XHCI_HCD=y
 101 CONFIG_USB_XHCI_DWC3=y
 102 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y