2 CONFIG_COUNTER_FREQUENCY=25000000
3 CONFIG_TARGET_LS1046ARDB=y
4 CONFIG_TEXT_BASE=0x40100000
5 CONFIG_SYS_MALLOC_LEN=0x102000
8 CONFIG_ENV_OFFSET=0x300000
9 CONFIG_ENV_SECT_SIZE=0x40000
10 CONFIG_SYS_I2C_MXC_I2C1=y
11 CONFIG_SYS_I2C_MXC_I2C2=y
12 CONFIG_SYS_I2C_MXC_I2C3=y
13 CONFIG_SYS_I2C_MXC_I2C4=y
15 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
17 CONFIG_QSPI_AHB_INIT=y
18 CONFIG_ENV_ADDR=0x40300000
20 CONFIG_LAYERSCAPE_NS_ACCESS=y
24 CONFIG_DISTRO_DEFAULTS=y
25 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
26 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
30 CONFIG_OF_BOARD_SETUP=y
32 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg"
33 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg"
37 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
38 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;"
39 CONFIG_ARCH_MISC_INIT=y
43 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
53 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
55 CONFIG_ENV_OVERWRITE=y
56 CONFIG_ENV_IS_IN_SPI_FLASH=y
57 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
59 CONFIG_ETHPRIME="FM1@DTSEC3"
64 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
67 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
68 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
73 CONFIG_SYS_NAND_ONFI_DETECTION=y
74 # CONFIG_SPI_FLASH_BAR is not set
75 CONFIG_SPI_FLASH_SPANSION=y
76 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
84 CONFIG_SYS_FMAN_FW_ADDR=0x40900000
87 CONFIG_PCIE_LAYERSCAPE_RC=y
88 CONFIG_PCIE_LAYERSCAPE_EP=y
91 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
99 CONFIG_USB_XHCI_DWC3=y
100 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y