configs/ls1046ardb_emmc_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1046ARDB=y
   3 CONFIG_SYS_TEXT_BASE=0x82000000
   4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   6 CONFIG_FSL_LS_PPA=y
   7 CONFIG_SPL_MMC_SUPPORT=y
   8 CONFIG_SPL_SERIAL_SUPPORT=y
   9 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
  10 CONFIG_SPL=y
  11 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
  12 CONFIG_DISTRO_DEFAULTS=y
  13 CONFIG_FIT_VERBOSE=y
  14 CONFIG_OF_BOARD_SETUP=y
  15 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,EMMC_BOOT"
  16 CONFIG_SD_BOOT=y
  17 CONFIG_BOOTDELAY=10
  18 CONFIG_USE_BOOTARGS=y
  19 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  20 # CONFIG_USE_BOOTCOMMAND is not set
  21 CONFIG_SPL_BOARD_INIT=y
  22 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
  23 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
  24 CONFIG_SPL_ENV_SUPPORT=y
  25 CONFIG_SPL_I2C_SUPPORT=y
  26 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
  27 CONFIG_SPL_WATCHDOG_SUPPORT=y
  28 CONFIG_CMD_GPT=y
  29 CONFIG_CMD_I2C=y
  30 CONFIG_CMD_MMC=y
  31 CONFIG_CMD_NAND=y
  32 CONFIG_CMD_PCI=y
  33 CONFIG_CMD_SF=y
  34 CONFIG_CMD_USB=y
  35 CONFIG_CMD_CACHE=y
  36 CONFIG_MP=y
  37 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  38 # CONFIG_SPL_EFI_PARTITION is not set
  39 CONFIG_OF_CONTROL=y
  40 CONFIG_ENV_IS_IN_MMC=y
  41 CONFIG_DM=y
  42 CONFIG_FSL_CAAM=y
  43 CONFIG_FSL_ESDHC=y
  44 CONFIG_SPI_FLASH=y
  45 CONFIG_PHYLIB=y
  46 CONFIG_NETDEVICES=y
  47 CONFIG_PHY_GIGE=y
  48 CONFIG_E1000=y
  49 CONFIG_PCI=y
  50 CONFIG_DM_PCI=y
  51 CONFIG_DM_PCI_COMPAT=y
  52 CONFIG_PCIE_LAYERSCAPE=y
  53 CONFIG_SYS_NS16550=y
  54 CONFIG_SPI=y
  55 CONFIG_DM_SPI=y
  56 CONFIG_FSL_QSPI=y
  57 CONFIG_USB=y
  58 CONFIG_DM_USB=y
  59 CONFIG_USB_XHCI_HCD=y
  60 CONFIG_USB_XHCI_DWC3=y
  61 CONFIG_USB_STORAGE=y