configs: ls208xa: enable sata configs for all ls208xa defconfigs
[platform/kernel/u-boot.git] / configs / ls1046ardb_emmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_FSL_LS_PPA=y
7 CONFIG_SPL_MMC_SUPPORT=y
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10 CONFIG_SPL=y
11 CONFIG_AHCI=y
12 CONFIG_DISTRO_DEFAULTS=y
13 CONFIG_NR_DRAM_BANKS=2
14 CONFIG_FIT_VERBOSE=y
15 CONFIG_OF_BOARD_SETUP=y
16 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,EMMC_BOOT"
17 CONFIG_SD_BOOT=y
18 CONFIG_BOOTDELAY=10
19 CONFIG_USE_BOOTARGS=y
20 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
21 # CONFIG_USE_BOOTCOMMAND is not set
22 CONFIG_MISC_INIT_R=y
23 CONFIG_SPL_BOARD_INIT=y
24 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
25 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
26 CONFIG_SPL_ENV_SUPPORT=y
27 CONFIG_SPL_I2C_SUPPORT=y
28 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
29 CONFIG_SPL_WATCHDOG_SUPPORT=y
30 CONFIG_CMD_GPT=y
31 CONFIG_CMD_I2C=y
32 CONFIG_CMD_MMC=y
33 CONFIG_CMD_NAND=y
34 CONFIG_CMD_PCI=y
35 CONFIG_CMD_SF=y
36 CONFIG_CMD_USB=y
37 CONFIG_CMD_CACHE=y
38 CONFIG_MP=y
39 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
40 # CONFIG_SPL_EFI_PARTITION is not set
41 CONFIG_OF_CONTROL=y
42 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
43 CONFIG_ENV_IS_IN_MMC=y
44 CONFIG_DM=y
45 CONFIG_SATA_CEVA=y
46 CONFIG_FSL_CAAM=y
47 CONFIG_DM_MMC=y
48 CONFIG_FSL_ESDHC=y
49 CONFIG_SPI_FLASH=y
50 CONFIG_PHYLIB=y
51 CONFIG_PHY_AQUANTIA=y
52 CONFIG_E1000=y
53 CONFIG_PCI=y
54 CONFIG_DM_PCI=y
55 CONFIG_DM_PCI_COMPAT=y
56 CONFIG_PCIE_LAYERSCAPE=y
57 CONFIG_DM_SCSI=y
58 CONFIG_SYS_NS16550=y
59 CONFIG_SPI=y
60 CONFIG_DM_SPI=y
61 CONFIG_FSL_QSPI=y
62 CONFIG_USB=y
63 CONFIG_DM_USB=y
64 CONFIG_USB_XHCI_HCD=y
65 CONFIG_USB_XHCI_DWC3=y