binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / ls1046aqds_qspi_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x40100000
4 CONFIG_SYS_MALLOC_LEN=0x102000
5 CONFIG_NR_DRAM_BANKS=2
6 CONFIG_SYS_MEMTEST_START=0x80000000
7 CONFIG_SYS_MEMTEST_END=0x9fffffff
8 CONFIG_ENV_SIZE=0x2000
9 CONFIG_ENV_OFFSET=0x300000
10 CONFIG_ENV_SECT_SIZE=0x10000
11 CONFIG_SYS_I2C_MXC_I2C1=y
12 CONFIG_SYS_I2C_MXC_I2C2=y
13 CONFIG_SYS_I2C_MXC_I2C3=y
14 CONFIG_SYS_I2C_MXC_I2C4=y
15 CONFIG_DM_GPIO=y
16 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
17 CONFIG_FSL_USE_PCA9547_MUX=y
18 CONFIG_VID=y
19 CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
20 CONFIG_VOL_MONITOR_INA220=y
21 CONFIG_VOL_MONITOR_IR36021_SET=y
22 CONFIG_FSL_LS_PPA=y
23 CONFIG_AHCI=y
24 CONFIG_DISTRO_DEFAULTS=y
25 CONFIG_REMAKE_ELF=y
26 CONFIG_MP=y
27 CONFIG_FIT_VERBOSE=y
28 CONFIG_OF_BOARD_SETUP=y
29 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
30 CONFIG_QSPI_BOOT=y
31 CONFIG_BOOTDELAY=10
32 CONFIG_USE_BOOTARGS=y
33 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)"
34 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;"
35 CONFIG_MISC_INIT_R=y
36 CONFIG_CMD_BOOTZ=y
37 CONFIG_CMD_GREPENV=y
38 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
39 CONFIG_CMD_MEMINFO=y
40 CONFIG_CMD_MEMTEST=y
41 CONFIG_CMD_GPIO=y
42 CONFIG_CMD_GPT=y
43 CONFIG_CMD_I2C=y
44 CONFIG_CMD_MMC=y
45 CONFIG_CMD_PCI=y
46 CONFIG_CMD_USB=y
47 CONFIG_CMD_CACHE=y
48 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)"
49 CONFIG_OF_CONTROL=y
50 CONFIG_ENV_OVERWRITE=y
51 CONFIG_ENV_IS_IN_SPI_FLASH=y
52 CONFIG_ENV_ADDR=0x40300000
53 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
54 CONFIG_DM=y
55 CONFIG_SATA=y
56 CONFIG_SATA_CEVA=y
57 CONFIG_FSL_CAAM=y
58 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
59 CONFIG_DDR_ECC=y
60 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
61 CONFIG_MPC8XXX_GPIO=y
62 CONFIG_DM_I2C=y
63 CONFIG_SYS_I2C_EARLY_INIT=y
64 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
65 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
66 CONFIG_FSL_ESDHC=y
67 # CONFIG_SPI_FLASH_BAR is not set
68 CONFIG_SPI_FLASH_EON=y
69 CONFIG_SPI_FLASH_SPANSION=y
70 CONFIG_SPI_FLASH_STMICRO=y
71 CONFIG_SPI_FLASH_SST=y
72 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
73 CONFIG_PHYLIB=y
74 CONFIG_PHYLIB_10G=y
75 CONFIG_PHY_REALTEK=y
76 CONFIG_PHY_VITESSE=y
77 CONFIG_E1000=y
78 CONFIG_FMAN_ENET=y
79 CONFIG_SYS_FMAN_FW_ADDR=0x40900000
80 CONFIG_NVME_PCI=y
81 CONFIG_PCI=y
82 CONFIG_DM_PCI_COMPAT=y
83 CONFIG_PCIE_LAYERSCAPE_RC=y
84 CONFIG_PCIE_LAYERSCAPE_EP=y
85 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
86 CONFIG_DM_SCSI=y
87 CONFIG_SYS_NS16550=y
88 CONFIG_SPI=y
89 CONFIG_DM_SPI=y
90 CONFIG_FSL_DSPI=y
91 CONFIG_FSL_QSPI=y
92 CONFIG_USB=y
93 CONFIG_USB_XHCI_HCD=y
94 CONFIG_USB_XHCI_DWC3=y