2 CONFIG_TARGET_LS1046AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_SPL_TEXT_BASE=0x10000000
10 CONFIG_DISTRO_DEFAULTS=y
12 CONFIG_OF_BOARD_SETUP=y
13 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
17 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
18 # CONFIG_USE_BOOTCOMMAND is not set
20 CONFIG_SPL_BOARD_INIT=y
21 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
22 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
37 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
39 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
40 CONFIG_ENV_IS_IN_NAND=y
46 CONFIG_MTD_NOR_FLASH=y
47 CONFIG_FLASH_CFI_DRIVER=y
48 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
49 CONFIG_SYS_FLASH_CFI=y
51 CONFIG_SF_DEFAULT_BUS=1
57 CONFIG_DM_PCI_COMPAT=y
58 CONFIG_PCIE_LAYERSCAPE=y
59 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
68 CONFIG_USB_XHCI_DWC3=y
69 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y