2 CONFIG_TARGET_LS1046AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x60100000
4 CONFIG_SYS_MALLOC_LEN=0x120000
6 CONFIG_SYS_MEMTEST_START=0x80000000
7 CONFIG_SYS_MEMTEST_END=0x9fffffff
8 CONFIG_ENV_SIZE=0x20000
9 CONFIG_ENV_SECT_SIZE=0x20000
10 CONFIG_SYS_I2C_MXC_I2C1=y
11 CONFIG_SYS_I2C_MXC_I2C2=y
12 CONFIG_SYS_I2C_MXC_I2C3=y
13 CONFIG_SYS_I2C_MXC_I2C4=y
15 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
16 CONFIG_FSL_USE_PCA9547_MUX=y
19 CONFIG_DISTRO_DEFAULTS=y
21 CONFIG_OF_BOARD_SETUP=y
22 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
25 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
26 # CONFIG_USE_BOOTCOMMAND is not set
31 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
43 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
45 CONFIG_ENV_OVERWRITE=y
46 CONFIG_ENV_IS_IN_FLASH=y
47 CONFIG_ENV_ADDR=0x60300000
51 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
53 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
55 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
56 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
59 CONFIG_MTD_NOR_FLASH=y
60 CONFIG_FLASH_CFI_DRIVER=y
61 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
62 CONFIG_SYS_FLASH_CFI=y
65 CONFIG_SYS_NAND_ONFI_DETECTION=y
66 CONFIG_SF_DEFAULT_BUS=1
67 CONFIG_SPI_FLASH_EON=y
68 CONFIG_SPI_FLASH_STMICRO=y
69 CONFIG_SPI_FLASH_SST=y
78 CONFIG_DM_PCI_COMPAT=y
79 CONFIG_PCIE_LAYERSCAPE_RC=y
80 CONFIG_PCIE_LAYERSCAPE_EP=y
81 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
90 CONFIG_USB_XHCI_DWC3=y