2 CONFIG_TARGET_LS1046AFRWY=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
7 CONFIG_ENV_OFFSET=0x500000
8 CONFIG_ENV_SECT_SIZE=0x40000
10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
11 CONFIG_FSL_USE_PCA9547_MUX=y
12 CONFIG_QSPI_AHB_INIT=y
13 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
14 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
16 CONFIG_DISTRO_DEFAULTS=y
18 CONFIG_OF_BOARD_SETUP=y
21 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
23 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
32 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
34 CONFIG_ENV_OVERWRITE=y
35 CONFIG_ENV_IS_IN_MMC=y
36 CONFIG_ENV_IS_IN_SPI_FLASH=y
37 CONFIG_ENV_ADDR=0x40500000
38 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
43 CONFIG_SYS_I2C_EEPROM_ADDR=0x52
47 # CONFIG_SPI_FLASH_BAR is not set
48 CONFIG_SPI_FLASH_STMICRO=y
49 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
57 CONFIG_DM_PCI_COMPAT=y
58 CONFIG_PCIE_LAYERSCAPE_RC=y
59 CONFIG_PCIE_LAYERSCAPE_EP=y
67 CONFIG_USB_XHCI_DWC3=y
68 CONFIG_USB_HOST_ETHER=y
69 CONFIG_USB_ETHER_ASIX=y
70 CONFIG_USB_ETHER_ASIX88179=y
71 CONFIG_USB_ETHER_RTL8152=y