2 CONFIG_TARGET_LS1046AFRWY=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_SYS_MALLOC_LEN=0x102000
10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
11 CONFIG_FSL_USE_PCA9547_MUX=y
12 CONFIG_QSPI_AHB_INIT=y
13 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
14 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
16 CONFIG_DISTRO_DEFAULTS=y
18 CONFIG_OF_BOARD_SETUP=y
20 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
22 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
31 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
33 CONFIG_ENV_OVERWRITE=y
34 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
37 # CONFIG_DDR_SPD is not set
39 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
40 CONFIG_SYS_I2C_EEPROM_ADDR=0x52
45 CONFIG_SYS_NAND_ONFI_DETECTION=y
46 # CONFIG_SPI_FLASH_BAR is not set
47 CONFIG_SPI_FLASH_STMICRO=y
48 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
55 CONFIG_DM_PCI_COMPAT=y
63 CONFIG_USB_XHCI_DWC3=y
64 CONFIG_USB_HOST_ETHER=y
65 CONFIG_USB_ETHER_ASIX=y
66 CONFIG_USB_ETHER_ASIX88179=y
67 CONFIG_USB_ETHER_RTL8152=y