arm: highbank: Add devicetree files
[platform/kernel/u-boot.git] / configs / ls1043aqds_tfa_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1043AQDS=y
3 CONFIG_TFABOOT=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_SYS_MALLOC_LEN=0x102000
6 CONFIG_NR_DRAM_BANKS=2
7 CONFIG_SYS_MEMTEST_START=0x80000000
8 CONFIG_SYS_MEMTEST_END=0x9fffffff
9 CONFIG_ENV_SIZE=0x2000
10 CONFIG_ENV_OFFSET=0x500000
11 CONFIG_ENV_SECT_SIZE=0x20000
12 CONFIG_SYS_I2C_MXC_I2C1=y
13 CONFIG_SYS_I2C_MXC_I2C2=y
14 CONFIG_SYS_I2C_MXC_I2C3=y
15 CONFIG_SYS_I2C_MXC_I2C4=y
16 CONFIG_DM_GPIO=y
17 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
18 CONFIG_FSL_USE_PCA9547_MUX=y
19 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
20 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
21 CONFIG_AHCI=y
22 CONFIG_DISTRO_DEFAULTS=y
23 CONFIG_FIT_VERBOSE=y
24 CONFIG_OF_BOARD_SETUP=y
25 CONFIG_BOOTDELAY=10
26 CONFIG_USE_BOOTARGS=y
27 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
28 # CONFIG_USE_BOOTCOMMAND is not set
29 CONFIG_MISC_INIT_R=y
30 CONFIG_CMD_BOOTZ=y
31 CONFIG_CMD_IMLS=y
32 CONFIG_CMD_GREPENV=y
33 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
34 CONFIG_CMD_MEMINFO=y
35 CONFIG_CMD_MEMTEST=y
36 CONFIG_CMD_GPIO=y
37 CONFIG_CMD_GPT=y
38 CONFIG_CMD_I2C=y
39 CONFIG_CMD_MMC=y
40 CONFIG_CMD_NAND=y
41 CONFIG_CMD_USB=y
42 CONFIG_CMD_CACHE=y
43 CONFIG_MP=y
44 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
45 CONFIG_OF_CONTROL=y
46 CONFIG_ENV_OVERWRITE=y
47 CONFIG_ENV_IS_IN_FLASH=y
48 CONFIG_ENV_IS_IN_MMC=y
49 CONFIG_ENV_IS_IN_NAND=y
50 CONFIG_ENV_IS_IN_SPI_FLASH=y
51 CONFIG_USE_ENV_SPI_BUS=y
52 CONFIG_ENV_SPI_BUS=0
53 CONFIG_ENV_ADDR=0x60500000
54 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
55 CONFIG_DM=y
56 CONFIG_SATA_CEVA=y
57 CONFIG_FSL_CAAM=y
58 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
59 CONFIG_DDR_ECC=y
60 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
61 CONFIG_DM_I2C=y
62 CONFIG_SPL_SYS_I2C_LEGACY=y
63 CONFIG_SYS_I2C_EARLY_INIT=y
64 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
65 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
66 CONFIG_FSL_ESDHC=y
67 CONFIG_MTD=y
68 CONFIG_MTD_NOR_FLASH=y
69 CONFIG_FLASH_CFI_DRIVER=y
70 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
71 CONFIG_SYS_FLASH_CFI=y
72 CONFIG_MTD_RAW_NAND=y
73 CONFIG_NAND_FSL_IFC=y
74 CONFIG_SYS_NAND_ONFI_DETECTION=y
75 CONFIG_SF_DEFAULT_BUS=1
76 # CONFIG_SPI_FLASH_BAR is not set
77 CONFIG_SPI_FLASH_SPANSION=y
78 CONFIG_PHYLIB=y
79 CONFIG_PHYLIB_10G=y
80 CONFIG_PHY_REALTEK=y
81 CONFIG_PHY_VITESSE=y
82 CONFIG_E1000=y
83 CONFIG_FMAN_ENET=y
84 CONFIG_SYS_FMAN_FW_ADDR=0x900000
85 CONFIG_NVME=y
86 CONFIG_PCI=y
87 CONFIG_DM_PCI_COMPAT=y
88 CONFIG_PCIE_LAYERSCAPE_RC=y
89 CONFIG_SYS_QE_FW_ADDR=0x940000
90 CONFIG_DM_SCSI=y
91 CONFIG_SYS_NS16550=y
92 CONFIG_SPI=y
93 CONFIG_DM_SPI=y
94 CONFIG_FSL_QSPI=y
95 CONFIG_USB=y
96 CONFIG_USB_XHCI_HCD=y
97 CONFIG_USB_XHCI_DWC3=y