configs/ls1043aqds_qspi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1043AQDS=y
   3 CONFIG_SYS_TEXT_BASE=0x40100000
   4 CONFIG_NR_DRAM_BANKS=2
   5 CONFIG_ENV_SIZE=0x2000
   6 CONFIG_ENV_OFFSET=0x300000
   7 CONFIG_ENV_SECT_SIZE=0x10000
   8 CONFIG_DM_GPIO=y
   9 CONFIG_FSL_LS_PPA=y
  10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
  11 CONFIG_AHCI=y
  12 CONFIG_DISTRO_DEFAULTS=y
  13 CONFIG_FIT_VERBOSE=y
  14 CONFIG_OF_BOARD_SETUP=y
  15 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
  16 CONFIG_QSPI_BOOT=y
  17 CONFIG_BOOTDELAY=10
  18 CONFIG_USE_BOOTARGS=y
  19 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
  20 # CONFIG_USE_BOOTCOMMAND is not set
  21 CONFIG_MISC_INIT_R=y
  22 CONFIG_CMD_BOOTZ=y
  23 CONFIG_CMD_GREPENV=y
  24 CONFIG_CMD_MEMINFO=y
  25 CONFIG_CMD_MEMTEST=y
  26 CONFIG_SYS_MEMTEST_START=0x80000000
  27 CONFIG_SYS_MEMTEST_END=0x9fffffff
  28 CONFIG_CMD_GPT=y
  29 CONFIG_CMD_I2C=y
  30 CONFIG_CMD_MMC=y
  31 CONFIG_CMD_USB=y
  32 CONFIG_CMD_CACHE=y
  33 CONFIG_MP=y
  34 CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
  35 CONFIG_OF_CONTROL=y
  36 CONFIG_ENV_OVERWRITE=y
  37 CONFIG_ENV_IS_IN_SPI_FLASH=y
  38 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  39 CONFIG_DM=y
  40 CONFIG_SATA_CEVA=y
  41 CONFIG_FSL_CAAM=y
  42 CONFIG_DM_I2C=y
  43 CONFIG_DM_MMC=y
  44 CONFIG_FSL_ESDHC=y
  45 # CONFIG_SPI_FLASH_BAR is not set
  46 CONFIG_SPI_FLASH_SPANSION=y
  47 CONFIG_PHYLIB=y
  48 CONFIG_PHYLIB_10G=y
  49 CONFIG_PHY_REALTEK=y
  50 CONFIG_PHY_VITESSE=y
  51 CONFIG_E1000=y
  52 CONFIG_FMAN_ENET=y
  53 CONFIG_NVME=y
  54 CONFIG_PCI=y
  55 CONFIG_DM_PCI=y
  56 CONFIG_DM_PCI_COMPAT=y
  57 CONFIG_PCIE_LAYERSCAPE_RC=y
  58 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
  59 CONFIG_DM_SCSI=y
  60 CONFIG_SYS_NS16550=y
  61 CONFIG_SPI=y
  62 CONFIG_DM_SPI=y
  63 CONFIG_FSL_QSPI=y
  64 CONFIG_USB=y
  65 CONFIG_DM_USB=y
  66 CONFIG_USB_XHCI_HCD=y
  67 CONFIG_USB_XHCI_DWC3=y
  68 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y