rockchip: Add basic support for phyCORE-RK3288 SoM based carrier board
[platform/kernel/u-boot.git] / configs / ls1043aqds_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1043AQDS=y
3 CONFIG_SPL_LIBCOMMON_SUPPORT=y
4 CONFIG_SPL_LIBGENERIC_SUPPORT=y
5 CONFIG_FSL_LS_PPA=y
6 CONFIG_SPL_SERIAL_SUPPORT=y
7 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
8 CONFIG_SPL_NAND_SUPPORT=y
9 CONFIG_SPL_WATCHDOG_SUPPORT=y
10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
11 CONFIG_FIT_VERBOSE=y
12 CONFIG_OF_BOARD_SETUP=y
13 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
14 CONFIG_NAND_BOOT=y
15 CONFIG_BOOTDELAY=10
16 CONFIG_SPL=y
17 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
18 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
19 CONFIG_SPL_ENV_SUPPORT=y
20 CONFIG_SPL_I2C_SUPPORT=y
21 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
22 CONFIG_HUSH_PARSER=y
23 CONFIG_CMD_BOOTZ=y
24 CONFIG_CMD_GREPENV=y
25 CONFIG_CMD_MEMTEST=y
26 CONFIG_CMD_MEMINFO=y
27 CONFIG_CMD_GPT=y
28 CONFIG_CMD_MMC=y
29 CONFIG_CMD_SF=y
30 CONFIG_CMD_I2C=y
31 CONFIG_CMD_USB=y
32 CONFIG_CMD_DHCP=y
33 CONFIG_CMD_PXE=y
34 CONFIG_CMD_MII=y
35 CONFIG_CMD_PING=y
36 CONFIG_CMD_CACHE=y
37 CONFIG_CMD_EXT2=y
38 CONFIG_CMD_FAT=y
39 # CONFIG_SPL_EFI_PARTITION is not set
40 CONFIG_OF_CONTROL=y
41 CONFIG_DM=y
42 CONFIG_FSL_CAAM=y
43 CONFIG_MTD_NOR_FLASH=y
44 CONFIG_SPI_FLASH=y
45 CONFIG_NETDEVICES=y
46 CONFIG_E1000=y
47 CONFIG_PCI=y
48 CONFIG_DM_PCI=y
49 CONFIG_DM_PCI_COMPAT=y
50 CONFIG_PCIE_LAYERSCAPE=y
51 CONFIG_SYS_NS16550=y
52 CONFIG_DM_SPI=y
53 CONFIG_USB=y
54 CONFIG_DM_USB=y
55 CONFIG_USB_XHCI_HCD=y
56 CONFIG_USB_XHCI_DWC3=y
57 CONFIG_USB_STORAGE=y