configs/ls1043aqds_nand_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1043AQDS=y
   3 CONFIG_SYS_TEXT_BASE=0x82000000
   4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   6 CONFIG_ENV_SIZE=0x2000
   7 CONFIG_ENV_OFFSET=0x300000
   8 CONFIG_FSL_LS_PPA=y
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
  11 CONFIG_NR_DRAM_BANKS=2
  12 CONFIG_SPL=y
  13 CONFIG_AHCI=y
  14 CONFIG_SPL_TEXT_BASE=0x10000000
  15 CONFIG_DISTRO_DEFAULTS=y
  16 CONFIG_FIT_VERBOSE=y
  17 CONFIG_OF_BOARD_SETUP=y
  18 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND_BOOT"
  19 CONFIG_NAND_BOOT=y
  20 CONFIG_BOOTDELAY=10
  21 CONFIG_USE_BOOTARGS=y
  22 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
  23 # CONFIG_USE_BOOTCOMMAND is not set
  24 CONFIG_MISC_INIT_R=y
  25 CONFIG_SPL_FSL_PBL=y
  26 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
  27 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
  28 CONFIG_SPL_ENV_SUPPORT=y
  29 CONFIG_SPL_I2C_SUPPORT=y
  30 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
  31 CONFIG_SPL_NAND_SUPPORT=y
  32 CONFIG_SPL_WATCHDOG_SUPPORT=y
  33 CONFIG_CMD_BOOTZ=y
  34 CONFIG_CMD_IMLS=y
  35 CONFIG_CMD_GREPENV=y
  36 CONFIG_CMD_MEMINFO=y
  37 CONFIG_CMD_MEMTEST=y
  38 CONFIG_CMD_GPT=y
  39 CONFIG_CMD_I2C=y
  40 CONFIG_CMD_MMC=y
  41 CONFIG_CMD_NAND=y
  42 CONFIG_CMD_SF=y
  43 CONFIG_CMD_USB=y
  44 CONFIG_CMD_CACHE=y
  45 CONFIG_MP=y
  46 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
  47 # CONFIG_SPL_EFI_PARTITION is not set
  48 CONFIG_OF_CONTROL=y
  49 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
  50 CONFIG_ENV_IS_IN_NAND=y
  51 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  52 CONFIG_DM=y
  53 CONFIG_SATA_CEVA=y
  54 CONFIG_FSL_CAAM=y
  55 CONFIG_DM_MMC=y
  56 CONFIG_FSL_ESDHC=y
  57 CONFIG_MTD=y
  58 CONFIG_MTD_NOR_FLASH=y
  59 CONFIG_FLASH_CFI_DRIVER=y
  60 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
  61 CONFIG_SYS_FLASH_CFI=y
  62 CONFIG_SPI_FLASH=y
  63 CONFIG_SF_DEFAULT_BUS=1
  64 CONFIG_PHYLIB=y
  65 CONFIG_E1000=y
  66 CONFIG_FMAN_ENET=y
  67 CONFIG_PCI=y
  68 CONFIG_DM_PCI=y
  69 CONFIG_DM_PCI_COMPAT=y
  70 CONFIG_PCIE_LAYERSCAPE=y
  71 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
  72 CONFIG_DM_SCSI=y
  73 CONFIG_SYS_NS16550=y
  74 CONFIG_SPI=y
  75 CONFIG_DM_SPI=y
  76 CONFIG_USB=y
  77 CONFIG_DM_USB=y
  78 CONFIG_USB_XHCI_HCD=y
  79 CONFIG_USB_XHCI_DWC3=y
  80 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
  81 CONFIG_DM_I2C=y
  82 CONFIG_DM_GPIO=y