2 CONFIG_TARGET_LS1043AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_SPL_SERIAL_SUPPORT=y
8 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
11 CONFIG_DISTRO_DEFAULTS=y
13 CONFIG_OF_BOARD_SETUP=y
14 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
18 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
19 # CONFIG_USE_BOOTCOMMAND is not set
20 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
21 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
22 CONFIG_SPL_ENV_SUPPORT=y
23 CONFIG_SPL_I2C_SUPPORT=y
24 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
25 CONFIG_SPL_NAND_SUPPORT=y
26 CONFIG_SPL_WATCHDOG_SUPPORT=y
40 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
41 # CONFIG_SPL_EFI_PARTITION is not set
43 CONFIG_ENV_IS_IN_NAND=y
47 CONFIG_MTD_NOR_FLASH=y
54 CONFIG_DM_PCI_COMPAT=y
55 CONFIG_PCIE_LAYERSCAPE=y
62 CONFIG_USB_XHCI_DWC3=y