pico-imx7d: Add SPL support
[platform/kernel/u-boot.git] / configs / ls1021aqds_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1021AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_SPL_SERIAL_SUPPORT=y
7 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
8 CONFIG_SPL=y
9 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
10 CONFIG_FIT=y
11 CONFIG_FIT_VERBOSE=y
12 CONFIG_OF_BOARD_SETUP=y
13 CONFIG_OF_STDOUT_VIA_ALIAS=y
14 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
15 CONFIG_NAND_BOOT=y
16 CONFIG_BOOTDELAY=3
17 CONFIG_SILENT_CONSOLE=y
18 # CONFIG_CONSOLE_MUX is not set
19 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
20 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
21 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
22 CONFIG_SPL_ENV_SUPPORT=y
23 CONFIG_SPL_I2C_SUPPORT=y
24 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
25 CONFIG_SPL_NAND_SUPPORT=y
26 CONFIG_SPL_WATCHDOG_SUPPORT=y
27 CONFIG_HUSH_PARSER=y
28 CONFIG_CMD_BOOTZ=y
29 CONFIG_CMD_IMLS=y
30 CONFIG_CMD_GREPENV=y
31 CONFIG_CMD_MEMINFO=y
32 CONFIG_CMD_MEMTEST=y
33 CONFIG_CMD_GPT=y
34 CONFIG_CMD_I2C=y
35 CONFIG_CMD_MMC=y
36 CONFIG_CMD_NAND=y
37 CONFIG_CMD_USB=y
38 # CONFIG_CMD_SETEXPR is not set
39 CONFIG_CMD_DHCP=y
40 CONFIG_CMD_MII=y
41 CONFIG_CMD_PING=y
42 CONFIG_CMD_BMP=y
43 CONFIG_CMD_EXT2=y
44 CONFIG_CMD_FAT=y
45 # CONFIG_SPL_EFI_PARTITION is not set
46 CONFIG_OF_CONTROL=y
47 CONFIG_ENV_IS_IN_NAND=y
48 CONFIG_DM=y
49 CONFIG_FSL_CAAM=y
50 CONFIG_SYS_FSL_DDR3=y
51 CONFIG_FSL_ESDHC=y
52 CONFIG_MTD_NOR_FLASH=y
53 CONFIG_NETDEVICES=y
54 CONFIG_PHY_GIGE=y
55 CONFIG_E1000=y
56 CONFIG_TSEC_ENET=y
57 CONFIG_PCI=y
58 CONFIG_DM_PCI=y
59 CONFIG_DM_PCI_COMPAT=y
60 CONFIG_PCIE_LAYERSCAPE=y
61 CONFIG_SYS_NS16550=y
62 CONFIG_USB=y
63 CONFIG_DM_USB=y
64 CONFIG_USB_XHCI_HCD=y
65 CONFIG_USB_XHCI_DWC3=y
66 CONFIG_USB_STORAGE=y
67 CONFIG_VIDEO_FSL_DCU_FB=y
68 CONFIG_VIDEO=y
69 # CONFIG_VIDEO_SW_CURSOR is not set