configs: ls1012a: Reduce CONFIG_ENV_SIZE to 0x2000
[platform/kernel/u-boot.git] / configs / ls1012ardb_tfa_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1012ARDB=y
3 CONFIG_TFABOOT=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0x500000
7 CONFIG_ENV_SECT_SIZE=0x40000
8 CONFIG_DM_GPIO=y
9 CONFIG_QSPI_AHB_INIT=y
10 CONFIG_NR_DRAM_BANKS=2
11 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
12 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
13 CONFIG_AHCI=y
14 CONFIG_DISTRO_DEFAULTS=y
15 # CONFIG_SYS_MALLOC_F is not set
16 CONFIG_FIT_VERBOSE=y
17 CONFIG_OF_BOARD_SETUP=y
18 CONFIG_OF_STDOUT_VIA_ALIAS=y
19 CONFIG_BOOTDELAY=10
20 CONFIG_USE_BOOTARGS=y
21 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
22 # CONFIG_DISPLAY_BOARDINFO is not set
23 CONFIG_DISPLAY_BOARDINFO_LATE=y
24 CONFIG_CMD_GREPENV=y
25 CONFIG_CMD_MEMTEST=y
26 CONFIG_SYS_MEMTEST_START=0x80000000
27 CONFIG_SYS_MEMTEST_END=0x9fffffff
28 CONFIG_CMD_GPT=y
29 CONFIG_CMD_I2C=y
30 CONFIG_CMD_MMC=y
31 CONFIG_CMD_PCI=y
32 CONFIG_CMD_USB=y
33 # CONFIG_CMD_SETEXPR is not set
34 CONFIG_CMD_CACHE=y
35 CONFIG_OF_CONTROL=y
36 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
37 CONFIG_ENV_IS_IN_SPI_FLASH=y
38 CONFIG_ENV_ADDR=0x40500000
39 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
40 CONFIG_NET_RANDOM_ETHADDR=y
41 CONFIG_DM=y
42 CONFIG_SATA_CEVA=y
43 CONFIG_DM_I2C=y
44 CONFIG_DM_MMC=y
45 CONFIG_FSL_ESDHC=y
46 CONFIG_MTD=y
47 CONFIG_DM_SPI_FLASH=y
48 # CONFIG_SPI_FLASH_BAR is not set
49 CONFIG_SPI_FLASH_SPANSION=y
50 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
51 CONFIG_FSL_PFE=y
52 CONFIG_DM_ETH=y
53 CONFIG_E1000=y
54 CONFIG_PCI=y
55 CONFIG_DM_PCI=y
56 CONFIG_DM_PCI_COMPAT=y
57 CONFIG_PCIE_LAYERSCAPE=y
58 CONFIG_DM_RTC=y
59 CONFIG_DM_SCSI=y
60 CONFIG_SYS_NS16550=y
61 CONFIG_SPI=y
62 CONFIG_DM_SPI=y
63 CONFIG_FSL_DSPI=y
64 CONFIG_FSL_QSPI=y
65 CONFIG_USB=y
66 CONFIG_DM_USB=y
67 CONFIG_USB_XHCI_HCD=y
68 CONFIG_USB_XHCI_DWC3=y