configs/ls1012aqds_qspi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_COUNTER_FREQUENCY=25000000
   3 CONFIG_TARGET_LS1012AQDS=y
   4 CONFIG_SYS_TEXT_BASE=0x40100000
   5 CONFIG_SYS_MALLOC_LEN=0x500000
   6 CONFIG_NR_DRAM_BANKS=2
   7 CONFIG_ENV_SIZE=0x2000
   8 CONFIG_ENV_OFFSET=0x300000
   9 CONFIG_ENV_SECT_SIZE=0x40000
  10 CONFIG_DM_GPIO=y
  11 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
  12 CONFIG_FSL_QIXIS=y
  13 CONFIG_FSL_LS_PPA=y
  14 CONFIG_QSPI_AHB_INIT=y
  15 CONFIG_AHCI=y
  16 CONFIG_SYS_MEMTEST_START=0x80000000
  17 CONFIG_SYS_MEMTEST_END=0x9fffffff
  18 CONFIG_DISTRO_DEFAULTS=y
  19 # CONFIG_SYS_MALLOC_F is not set
  20 CONFIG_FIT_VERBOSE=y
  21 CONFIG_OF_BOARD_SETUP=y
  22 CONFIG_OF_STDOUT_VIA_ALIAS=y
  23 CONFIG_QSPI_BOOT=y
  24 CONFIG_BOOTDELAY=10
  25 CONFIG_USE_BOOTARGS=y
  26 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
  27 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;"
  28 # CONFIG_DISPLAY_BOARDINFO is not set
  29 CONFIG_DISPLAY_BOARDINFO_LATE=y
  30 CONFIG_MISC_INIT_R=y
  31 CONFIG_ID_EEPROM=y
  32 CONFIG_CMD_GREPENV=y
  33 CONFIG_CMD_EEPROM=y
  34 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
  35 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  36 CONFIG_CMD_MEMINFO=y
  37 CONFIG_CMD_MEMTEST=y
  38 CONFIG_CMD_GPT=y
  39 CONFIG_CMD_I2C=y
  40 CONFIG_CMD_MMC=y
  41 CONFIG_CMD_PCI=y
  42 CONFIG_CMD_SPI=y
  43 CONFIG_DEFAULT_SPI_BUS=1
  44 CONFIG_CMD_USB=y
  45 # CONFIG_CMD_SETEXPR is not set
  46 CONFIG_CMD_CACHE=y
  47 CONFIG_OF_CONTROL=y
  48 CONFIG_ENV_OVERWRITE=y
  49 CONFIG_ENV_IS_IN_SPI_FLASH=y
  50 CONFIG_ENV_SPI_BUS=0
  51 CONFIG_ENV_SPI_MAX_HZ=1000000
  52 CONFIG_ENV_SPI_MODE=0x03
  53 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  54 CONFIG_NET_RANDOM_ETHADDR=y
  55 CONFIG_DM=y
  56 CONFIG_SATA=y
  57 CONFIG_SCSI_AHCI=y
  58 CONFIG_SATA_CEVA=y
  59 CONFIG_MPC8XXX_GPIO=y
  60 CONFIG_DM_I2C=y
  61 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  62 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
  63 CONFIG_FSL_ESDHC=y
  64 CONFIG_MTD=y
  65 CONFIG_DM_SPI_FLASH=y
  66 CONFIG_SF_DEFAULT_BUS=1
  67 CONFIG_SF_DEFAULT_SPEED=10000000
  68 # CONFIG_SPI_FLASH_BAR is not set
  69 CONFIG_SPI_FLASH_EON=y
  70 CONFIG_SPI_FLASH_SPANSION=y
  71 CONFIG_SPI_FLASH_STMICRO=y
  72 CONFIG_SPI_FLASH_SST=y
  73 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  74 CONFIG_FSL_PFE=y
  75 CONFIG_DM_ETH=y
  76 CONFIG_E1000=y
  77 CONFIG_NVME_PCI=y
  78 CONFIG_PCI=y
  79 CONFIG_PCIE_LAYERSCAPE_RC=y
  80 CONFIG_DM_RTC=y
  81 CONFIG_RTC_PCF8563=y
  82 CONFIG_SCSI=y
  83 CONFIG_DM_SCSI=y
  84 CONFIG_SYS_NS16550=y
  85 CONFIG_SPI=y
  86 CONFIG_DM_SPI=y
  87 CONFIG_FSL_DSPI=y
  88 CONFIG_FSL_QSPI=y
  89 CONFIG_USB=y
  90 CONFIG_USB_XHCI_HCD=y
  91 CONFIG_USB_XHCI_DWC3=y