arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14
[platform/kernel/u-boot.git] / configs / ls1012afrwy_tfa_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1012AFRWY=y
3 CONFIG_TFABOOT=y
4 CONFIG_SYS_TEXT_BASE=0x82000000
5 CONFIG_NR_DRAM_BANKS=2
6 CONFIG_SYS_MEMTEST_START=0x80000000
7 CONFIG_SYS_MEMTEST_END=0x9fffffff
8 CONFIG_ENV_SIZE=0x2000
9 CONFIG_ENV_OFFSET=0x1D0000
10 CONFIG_ENV_SECT_SIZE=0x10000
11 CONFIG_SYS_MALLOC_LEN=0x500000
12 CONFIG_DM_GPIO=y
13 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
14 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
15 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
16 CONFIG_AHCI=y
17 CONFIG_DISTRO_DEFAULTS=y
18 # CONFIG_SYS_MALLOC_F is not set
19 CONFIG_FIT_VERBOSE=y
20 CONFIG_OF_BOARD_SETUP=y
21 CONFIG_OF_STDOUT_VIA_ALIAS=y
22 CONFIG_BOOTDELAY=10
23 CONFIG_USE_BOOTARGS=y
24 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
25 # CONFIG_DISPLAY_BOARDINFO is not set
26 CONFIG_DISPLAY_BOARDINFO_LATE=y
27 CONFIG_CMD_GREPENV=y
28 CONFIG_CMD_MEMINFO=y
29 CONFIG_CMD_MEMTEST=y
30 CONFIG_CMD_GPIO=y
31 CONFIG_CMD_GPT=y
32 CONFIG_CMD_I2C=y
33 CONFIG_CMD_MMC=y
34 CONFIG_CMD_PCI=y
35 CONFIG_CMD_USB=y
36 # CONFIG_CMD_SETEXPR is not set
37 CONFIG_CMD_CACHE=y
38 CONFIG_OF_CONTROL=y
39 CONFIG_ENV_OVERWRITE=y
40 CONFIG_ENV_IS_IN_SPI_FLASH=y
41 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
42 CONFIG_NET_RANDOM_ETHADDR=y
43 CONFIG_DM=y
44 CONFIG_SATA_CEVA=y
45 CONFIG_DM_I2C=y
46 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
47 CONFIG_FSL_ESDHC=y
48 CONFIG_MTD=y
49 CONFIG_DM_SPI_FLASH=y
50 # CONFIG_SPI_FLASH_BAR is not set
51 CONFIG_SPI_FLASH_WINBOND=y
52 CONFIG_FSL_PFE=y
53 CONFIG_DM_ETH=y
54 CONFIG_E1000=y
55 CONFIG_NVME=y
56 CONFIG_PCI=y
57 CONFIG_PCIE_LAYERSCAPE_RC=y
58 CONFIG_DM_RTC=y
59 CONFIG_DM_SCSI=y
60 CONFIG_SYS_NS16550=y
61 CONFIG_SPI=y
62 CONFIG_DM_SPI=y
63 CONFIG_FSL_QSPI=y
64 CONFIG_USB=y
65 CONFIG_USB_XHCI_HCD=y
66 CONFIG_USB_XHCI_DWC3=y
67 CONFIG_USB_HOST_ETHER=y
68 CONFIG_USB_ETHER_ASIX=y
69 CONFIG_USB_ETHER_ASIX88179=y
70 CONFIG_USB_ETHER_RTL8152=y