configs/ls1012afrwy_tfa_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1012AFRWY=y
   3 CONFIG_TFABOOT=y
   4 CONFIG_SYS_TEXT_BASE=0x82000000
   5 CONFIG_ENV_SIZE=0x2000
   6 CONFIG_ENV_OFFSET=0x1D0000
   7 CONFIG_ENV_SECT_SIZE=0x10000
   8 CONFIG_DM_GPIO=y
   9 CONFIG_NR_DRAM_BANKS=2
  10 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
  11 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
  12 CONFIG_AHCI=y
  13 CONFIG_DISTRO_DEFAULTS=y
  14 # CONFIG_SYS_MALLOC_F is not set
  15 CONFIG_FIT_VERBOSE=y
  16 CONFIG_OF_BOARD_SETUP=y
  17 CONFIG_OF_STDOUT_VIA_ALIAS=y
  18 CONFIG_BOOTDELAY=10
  19 CONFIG_USE_BOOTARGS=y
  20 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
  21 # CONFIG_DISPLAY_BOARDINFO is not set
  22 CONFIG_DISPLAY_BOARDINFO_LATE=y
  23 CONFIG_CMD_GREPENV=y
  24 CONFIG_CMD_MEMINFO=y
  25 CONFIG_CMD_MEMTEST=y
  26 CONFIG_SYS_MEMTEST_START=0x80000000
  27 CONFIG_SYS_MEMTEST_END=0x9fffffff
  28 CONFIG_CMD_GPT=y
  29 CONFIG_CMD_I2C=y
  30 CONFIG_CMD_MMC=y
  31 CONFIG_CMD_PCI=y
  32 CONFIG_CMD_USB=y
  33 # CONFIG_CMD_SETEXPR is not set
  34 CONFIG_CMD_CACHE=y
  35 CONFIG_OF_CONTROL=y
  36 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
  37 CONFIG_ENV_IS_IN_SPI_FLASH=y
  38 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  39 CONFIG_NET_RANDOM_ETHADDR=y
  40 CONFIG_DM=y
  41 CONFIG_SATA_CEVA=y
  42 CONFIG_DM_I2C=y
  43 CONFIG_DM_MMC=y
  44 CONFIG_FSL_ESDHC=y
  45 CONFIG_MTD=y
  46 CONFIG_DM_SPI_FLASH=y
  47 # CONFIG_SPI_FLASH_BAR is not set
  48 CONFIG_SPI_FLASH_WINBOND=y
  49 CONFIG_FSL_PFE=y
  50 CONFIG_DM_ETH=y
  51 CONFIG_E1000=y
  52 CONFIG_PCI=y
  53 CONFIG_DM_PCI=y
  54 CONFIG_DM_PCI_COMPAT=y
  55 CONFIG_PCIE_LAYERSCAPE=y
  56 CONFIG_DM_RTC=y
  57 CONFIG_DM_SCSI=y
  58 CONFIG_SYS_NS16550=y
  59 CONFIG_SPI=y
  60 CONFIG_DM_SPI=y
  61 CONFIG_FSL_QSPI=y
  62 CONFIG_USB=y
  63 CONFIG_DM_USB=y
  64 CONFIG_USB_XHCI_HCD=y
  65 CONFIG_USB_XHCI_DWC3=y
  66 CONFIG_USB_HOST_ETHER=y
  67 CONFIG_USB_ETHER_ASIX=y
  68 CONFIG_USB_ETHER_ASIX88179=y
  69 CONFIG_USB_ETHER_RTL8152=y