configs: ls1021a-tsn: enable sja1105 switch driver
[platform/kernel/u-boot.git] / configs / leez-rk3399_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_ROCKCHIP=y
4 CONFIG_SYS_TEXT_BASE=0x00200000
5 CONFIG_NR_DRAM_BANKS=1
6 CONFIG_ENV_OFFSET=0x3F8000
7 CONFIG_DEFAULT_DEVICE_TREE="rk3399-leez-p710"
8 CONFIG_ROCKCHIP_RK3399=y
9 CONFIG_TARGET_EVB_RK3399=y
10 CONFIG_DEBUG_UART_BASE=0xFF1A0000
11 CONFIG_DEBUG_UART_CLOCK=24000000
12 CONFIG_DEBUG_UART=y
13 CONFIG_SYS_LOAD_ADDR=0x800800
14 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
15 CONFIG_DISPLAY_BOARDINFO_LATE=y
16 CONFIG_SPL_STACK_R=y
17 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
18 CONFIG_TPL=y
19 CONFIG_CMD_BOOTZ=y
20 CONFIG_CMD_GPT=y
21 CONFIG_CMD_MMC=y
22 CONFIG_CMD_USB=y
23 # CONFIG_CMD_SETEXPR is not set
24 CONFIG_CMD_TIME=y
25 CONFIG_SPL_OF_CONTROL=y
26 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
27 CONFIG_ENV_IS_IN_MMC=y
28 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
29 CONFIG_ROCKCHIP_GPIO=y
30 CONFIG_SYS_I2C_ROCKCHIP=y
31 CONFIG_MMC_DW=y
32 CONFIG_MMC_DW_ROCKCHIP=y
33 CONFIG_MMC_SDHCI=y
34 CONFIG_MMC_SDHCI_ROCKCHIP=y
35 CONFIG_DM_ETH=y
36 CONFIG_ETH_DESIGNWARE=y
37 CONFIG_GMAC_ROCKCHIP=y
38 CONFIG_PMIC_RK8XX=y
39 CONFIG_REGULATOR_PWM=y
40 CONFIG_REGULATOR_RK8XX=y
41 CONFIG_PWM_ROCKCHIP=y
42 CONFIG_RAM_RK3399_LPDDR4=y
43 CONFIG_BAUDRATE=1500000
44 CONFIG_DEBUG_UART_SHIFT=2
45 CONFIG_SYSRESET=y
46 CONFIG_USB=y
47 CONFIG_USB_XHCI_HCD=y
48 CONFIG_USB_XHCI_DWC3=y
49 CONFIG_USB_EHCI_HCD=y
50 CONFIG_USB_EHCI_GENERIC=y
51 CONFIG_USB_HOST_ETHER=y
52 CONFIG_USB_ETHER_ASIX=y
53 CONFIG_USB_ETHER_ASIX88179=y
54 CONFIG_USB_ETHER_MCS7830=y
55 CONFIG_USB_ETHER_RTL8152=y
56 CONFIG_USB_ETHER_SMSC95XX=y
57 CONFIG_SPL_TINY_MEMSET=y
58 CONFIG_ERRNO_STR=y