kwbimage: Add support for extracting images via dumpimage tool
[platform/kernel/u-boot.git] / configs / imx8mq_phanbell_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_IMX8M=y
3 CONFIG_SYS_TEXT_BASE=0x40200000
4 CONFIG_SYS_MALLOC_F_LEN=0x4000
5 CONFIG_ENV_SIZE=0x1000
6 CONFIG_ENV_OFFSET=0x400000
7 CONFIG_DM_GPIO=y
8 CONFIG_DEFAULT_DEVICE_TREE="imx8mq-phanbell"
9 CONFIG_SPL_TEXT_BASE=0x7E1000
10 CONFIG_TARGET_IMX8MQ_PHANBELL=y
11 CONFIG_SPL_SERIAL_SUPPORT=y
12 CONFIG_SPL=y
13 CONFIG_FIT=y
14 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
15 CONFIG_SPL_LOAD_FIT=y
16 CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
17 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
18 CONFIG_SD_BOOT=y
19 CONFIG_BOARD_EARLY_INIT_F=y
20 CONFIG_SPL_BOARD_INIT=y
21 CONFIG_HUSH_PARSER=y
22 # CONFIG_BOOTM_NETBSD is not set
23 # CONFIG_CMD_EXPORTENV is not set
24 # CONFIG_CMD_IMPORTENV is not set
25 # CONFIG_CMD_CRC32 is not set
26 CONFIG_CMD_FUSE=y
27 CONFIG_CMD_GPIO=y
28 CONFIG_CMD_I2C=y
29 CONFIG_CMD_MMC=y
30 CONFIG_CMD_DHCP=y
31 CONFIG_CMD_MII=y
32 CONFIG_CMD_PING=y
33 CONFIG_CMD_CACHE=y
34 CONFIG_CMD_REGULATOR=y
35 CONFIG_CMD_EXT2=y
36 CONFIG_CMD_EXT4=y
37 CONFIG_CMD_EXT4_WRITE=y
38 CONFIG_CMD_FAT=y
39 # CONFIG_SPL_DOS_PARTITION is not set
40 CONFIG_OF_CONTROL=y
41 CONFIG_ENV_OVERWRITE=y
42 CONFIG_ENV_IS_IN_MMC=y
43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
44 CONFIG_SYS_MMC_ENV_DEV=1
45 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
46 CONFIG_DM_I2C=y
47 CONFIG_SYS_I2C_MXC=y
48 CONFIG_SUPPORT_EMMC_BOOT=y
49 CONFIG_FSL_USDHC=y
50 CONFIG_DM_ETH=y
51 CONFIG_PINCTRL=y
52 CONFIG_PINCTRL_IMX8M=y
53 CONFIG_POWER_DOMAIN=y
54 CONFIG_IMX8M_POWER_DOMAIN=y
55 CONFIG_DM_REGULATOR=y
56 CONFIG_DM_REGULATOR_FIXED=y
57 CONFIG_DM_REGULATOR_GPIO=y
58 CONFIG_DM_RESET=y
59 CONFIG_MXC_UART=y
60 CONFIG_DM_THERMAL=y