fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()
[platform/kernel/u-boot.git] / configs / imx28_xea_defconfig
1 CONFIG_ARM=y
2 CONFIG_SPL_SYS_THUMB_BUILD=y
3 CONFIG_ARCH_MX28=y
4 CONFIG_SYS_TEXT_BASE=0x40002000
5 CONFIG_SPL_GPIO_SUPPORT=y
6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
8 CONFIG_SYS_MALLOC_F_LEN=0x800
9 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
10 CONFIG_DM_GPIO=y
11 CONFIG_SPL_DM_SPI=y
12 CONFIG_TARGET_XEA=y
13 CONFIG_SPL_MMC_SUPPORT=y
14 CONFIG_SPL_SERIAL_SUPPORT=y
15 CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
16 CONFIG_NR_DRAM_BANKS=1
17 CONFIG_SPL=y
18 CONFIG_ENV_OFFSET_REDUND=0x90000
19 CONFIG_SPL_SPI_FLASH_SUPPORT=y
20 CONFIG_SPL_SPI_SUPPORT=y
21 CONFIG_SPL_TEXT_BASE=0x1000
22 CONFIG_SPL_PAYLOAD="u-boot.img"
23 CONFIG_FIT=y
24 CONFIG_OF_BOARD_SETUP=y
25 CONFIG_BOARD_EARLY_INIT_F=y
26 CONFIG_SPL_BOARD_INIT=y
27 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
28 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
29 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
30 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
31 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
32 CONFIG_SPL_DMA=y
33 CONFIG_SPL_MMC_TINY=y
34 CONFIG_SPL_OS_BOOT=y
35 CONFIG_SPL_SPI_LOAD=y
36 CONFIG_HUSH_PARSER=y
37 CONFIG_CMD_SPL=y
38 CONFIG_CMD_ASKENV=y
39 CONFIG_CMD_GREPENV=y
40 CONFIG_CMD_DM=y
41 CONFIG_CMD_GPIO=y
42 CONFIG_CMD_MMC=y
43 CONFIG_CMD_MTD=y
44 # CONFIG_CMD_PINMUX is not set
45 CONFIG_CMD_SPI=y
46 CONFIG_CMD_DHCP=y
47 CONFIG_CMD_MII=y
48 CONFIG_CMD_PING=y
49 CONFIG_CMD_CACHE=y
50 CONFIG_CMD_REGULATOR=y
51 CONFIG_CMD_EXT4=y
52 CONFIG_CMD_FS_GENERIC=y
53 CONFIG_CMD_MTDPARTS=y
54 CONFIG_MTDIDS_DEFAULT="nor0=spi3.0"
55 CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),4096k(kernel),8192k(swupdate),-(unused2)"
56 CONFIG_DOS_PARTITION=y
57 CONFIG_OF_CONTROL=y
58 CONFIG_SPL_OF_CONTROL=y
59 CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
60 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts"
61 CONFIG_SPL_OF_PLATDATA=y
62 CONFIG_ENV_IS_IN_SPI_FLASH=y
63 CONFIG_USE_ENV_SPI_BUS=y
64 CONFIG_ENV_SPI_BUS=3
65 CONFIG_USE_ENV_SPI_CS=y
66 CONFIG_ENV_SPI_CS=0
67 CONFIG_USE_ENV_SPI_MAX_HZ=y
68 CONFIG_ENV_SPI_MAX_HZ=40000000
69 CONFIG_USE_ENV_SPI_MODE=y
70 CONFIG_ENV_SPI_MODE=0x0
71 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
72 CONFIG_NET_RANDOM_ETHADDR=y
73 CONFIG_DM=y
74 CONFIG_SPL_DM=y
75 CONFIG_DEVRES=y
76 CONFIG_MXS_GPIO=y
77 CONFIG_DM_MMC=y
78 CONFIG_SUPPORT_EMMC_BOOT=y
79 CONFIG_MMC_MXS=y
80 CONFIG_MTD=y
81 CONFIG_DM_SPI_FLASH=y
82 CONFIG_SF_DEFAULT_BUS=3
83 CONFIG_SF_DEFAULT_MODE=0x0
84 CONFIG_SF_DEFAULT_SPEED=40000000
85 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
86 CONFIG_SPI_FLASH_ISSI=y
87 CONFIG_SPI_FLASH_SPANSION=y
88 CONFIG_SPI_FLASH_STMICRO=y
89 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
90 CONFIG_PHYLIB=y
91 CONFIG_PHY_ADDR_ENABLE=y
92 CONFIG_PHY_ADDR=1
93 CONFIG_PHY_FIXED=y
94 CONFIG_DM_ETH=y
95 CONFIG_FEC_MXC=y
96 CONFIG_MII=y
97 CONFIG_PINCTRL=y
98 CONFIG_PINCTRL_MXS=y
99 CONFIG_DM_REGULATOR=y
100 CONFIG_DM_REGULATOR_FIXED=y
101 CONFIG_DM_REGULATOR_GPIO=y
102 CONFIG_CONS_INDEX=0
103 CONFIG_SPI=y
104 CONFIG_DM_SPI=y
105 CONFIG_MXS_SPI=y
106 CONFIG_FS_FAT=y
107 # CONFIG_SPL_OF_LIBFDT is not set