configs/imx28_xea_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SPL_SYS_THUMB_BUILD=y
   3 CONFIG_ARCH_MX28=y
   4 CONFIG_SYS_TEXT_BASE=0x40002000
   5 CONFIG_SPL_GPIO=y
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_SYS_MALLOC_F_LEN=0x800
   9 CONFIG_NR_DRAM_BANKS=1
  10 CONFIG_DM_GPIO=y
  11 CONFIG_SPL_DM_SPI=y
  12 CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
  13 CONFIG_SPL_TEXT_BASE=0x1000
  14 CONFIG_TARGET_XEA=y
  15 CONFIG_SPL_MMC_SUPPORT=y
  16 CONFIG_SPL_SERIAL_SUPPORT=y
  17 CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
  18 CONFIG_SPL=y
  19 CONFIG_ENV_OFFSET_REDUND=0x90000
  20 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  21 CONFIG_SPL_SPI_SUPPORT=y
  22 CONFIG_SPL_PAYLOAD="u-boot.img"
  23 CONFIG_FIT=y
  24 CONFIG_OF_BOARD_SETUP=y
  25 CONFIG_USE_BOOTARGS=y
  26 CONFIG_BOOTARGS="console=ttyAMA0,115200n8"
  27 CONFIG_USE_PREBOOT=y
  28 CONFIG_PREBOOT="run prebootcmd"
  29 CONFIG_BOARD_EARLY_INIT_F=y
  30 CONFIG_SPL_BOARD_INIT=y
  31 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
  32 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  33 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
  34 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
  35 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
  36 CONFIG_SPL_DMA=y
  37 CONFIG_SPL_MMC_TINY=y
  38 CONFIG_SPL_DM_SPI_FLASH=y
  39 CONFIG_SPL_OS_BOOT=y
  40 CONFIG_SPL_SPI_LOAD=y
  41 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
  42 CONFIG_SPL_YMODEM_SUPPORT=y
  43 CONFIG_HUSH_PARSER=y
  44 CONFIG_CMD_SPL=y
  45 CONFIG_CMD_ASKENV=y
  46 CONFIG_CMD_GREPENV=y
  47 CONFIG_CMD_DM=y
  48 CONFIG_CMD_GPIO=y
  49 CONFIG_CMD_MMC=y
  50 CONFIG_CMD_MTD=y
  51 # CONFIG_CMD_PINMUX is not set
  52 CONFIG_CMD_SPI=y
  53 CONFIG_CMD_DHCP=y
  54 CONFIG_CMD_MII=y
  55 CONFIG_CMD_PING=y
  56 CONFIG_CMD_CACHE=y
  57 CONFIG_CMD_REGULATOR=y
  58 CONFIG_CMD_EXT4=y
  59 CONFIG_CMD_FS_GENERIC=y
  60 CONFIG_CMD_MTDPARTS=y
  61 CONFIG_MTDIDS_DEFAULT="nor0=spi3.0"
  62 CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),4096k(kernel),8192k(swupdate),-(unused2)"
  63 CONFIG_DOS_PARTITION=y
  64 CONFIG_OF_CONTROL=y
  65 CONFIG_SPL_OF_CONTROL=y
  66 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts"
  67 CONFIG_SPL_OF_PLATDATA=y
  68 # CONFIG_SPL_OF_PLATDATA_PARENT is not set
  69 CONFIG_ENV_OVERWRITE=y
  70 CONFIG_ENV_IS_IN_SPI_FLASH=y
  71 CONFIG_USE_ENV_SPI_BUS=y
  72 CONFIG_ENV_SPI_BUS=3
  73 CONFIG_USE_ENV_SPI_CS=y
  74 CONFIG_ENV_SPI_CS=0
  75 CONFIG_USE_ENV_SPI_MAX_HZ=y
  76 CONFIG_ENV_SPI_MAX_HZ=40000000
  77 CONFIG_USE_ENV_SPI_MODE=y
  78 CONFIG_ENV_SPI_MODE=0x0
  79 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  80 CONFIG_NET_RANDOM_ETHADDR=y
  81 CONFIG_DM=y
  82 CONFIG_SPL_DM=y
  83 CONFIG_DEVRES=y
  84 CONFIG_MXS_GPIO=y
  85 CONFIG_SUPPORT_EMMC_BOOT=y
  86 CONFIG_MMC_MXS=y
  87 CONFIG_MTD=y
  88 CONFIG_DM_SPI_FLASH=y
  89 CONFIG_SF_DEFAULT_BUS=3
  90 CONFIG_SF_DEFAULT_MODE=0x0
  91 CONFIG_SF_DEFAULT_SPEED=40000000
  92 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
  93 CONFIG_SPI_FLASH_ISSI=y
  94 CONFIG_SPI_FLASH_SPANSION=y
  95 CONFIG_SPI_FLASH_STMICRO=y
  96 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  97 CONFIG_PHYLIB=y
  98 CONFIG_PHY_ADDR_ENABLE=y
  99 CONFIG_PHY_ADDR=1
 100 CONFIG_PHY_FIXED=y
 101 CONFIG_DM_ETH=y
 102 CONFIG_FEC_MXC=y
 103 CONFIG_MII=y
 104 CONFIG_PINCTRL=y
 105 CONFIG_PINCTRL_MXS=y
 106 CONFIG_DM_REGULATOR=y
 107 CONFIG_DM_REGULATOR_FIXED=y
 108 CONFIG_DM_REGULATOR_GPIO=y
 109 CONFIG_CONS_INDEX=0
 110 CONFIG_SPI=y
 111 CONFIG_DM_SPI=y
 112 CONFIG_MXS_SPI=y
 113 CONFIG_FS_FAT=y
 114 # CONFIG_SPL_OF_LIBFDT is not set