powerpc: Migrate HIGH_BATS to Kconfig
[platform/kernel/u-boot.git] / configs / ids8313_defconfig
1 CONFIG_PPC=y
2 CONFIG_SYS_TEXT_BASE=0xFFF00000
3 CONFIG_SYS_CLK_FREQ=66000000
4 CONFIG_MPC83xx=y
5 CONFIG_HIGH_BATS=y
6 CONFIG_TARGET_IDS8313=y
7 CONFIG_CORE_PLL_RATIO_2_1=y
8 CONFIG_PCI_HOST_MODE_ENABLE=y
9 CONFIG_BOOT_ROM_INTERFACE_GPCM_8BIT=y
10 CONFIG_FIT=y
11 CONFIG_FIT_SIGNATURE=y
12 CONFIG_IMAGE_FORMAT_LEGACY=y
13 CONFIG_OF_BOARD_SETUP=y
14 CONFIG_OF_STDOUT_VIA_ALIAS=y
15 CONFIG_BOOTDELAY=1
16 CONFIG_MISC_INIT_R=y
17 CONFIG_VERSION_VARIABLE=y
18 # CONFIG_DISPLAY_BOARDINFO is not set
19 CONFIG_HUSH_PARSER=y
20 # CONFIG_AUTO_COMPLETE is not set
21 CONFIG_AUTOBOOT_KEYED=y
22 CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n"
23 CONFIG_AUTOBOOT_DELAY_STR="ids"
24 CONFIG_CMD_IMLS=y
25 CONFIG_CMD_ENV_FLAGS=y
26 CONFIG_CMD_I2C=y
27 CONFIG_CMD_NAND=y
28 CONFIG_CMD_NAND_TRIMFFS=y
29 CONFIG_CMD_SPI=y
30 # CONFIG_CMD_SETEXPR is not set
31 CONFIG_CMD_DHCP=y
32 CONFIG_CMD_MII=y
33 CONFIG_CMD_PING=y
34 CONFIG_CMD_SNTP=y
35 CONFIG_CMD_DATE=y
36 CONFIG_CMD_JFFS2=y
37 CONFIG_CMD_MTDPARTS=y
38 CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash"
39 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)"
40 CONFIG_CMD_UBI=y
41 CONFIG_BOOTCOUNT_LIMIT=y
42 CONFIG_BOOTCOUNT_I2C=y
43 CONFIG_SYS_BOOTCOUNT_ADDR=0x9
44 # CONFIG_MMC is not set
45 CONFIG_MTD_NOR_FLASH=y
46 CONFIG_FLASH_CFI_DRIVER=y
47 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
48 CONFIG_FLASH_CFI_MTD=y
49 CONFIG_SYS_FLASH_PROTECTION=y
50 CONFIG_SYS_FLASH_CFI=y
51 CONFIG_PHY_MARVELL=y
52 CONFIG_MII=y
53 CONFIG_TSEC_ENET=y
54 # CONFIG_PCI is not set
55 CONFIG_SYS_NS16550=y
56 CONFIG_SPI=y
57 CONFIG_MPC8XXX_SPI=y
58 CONFIG_OF_LIBFDT=y