binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / giedi_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_IMX8=y
3 CONFIG_SYS_TEXT_BASE=0x80020000
4 CONFIG_SYS_MALLOC_LEN=0x2800000
5 CONFIG_SYS_MALLOC_F_LEN=0x4000
6 CONFIG_SPL_GPIO=y
7 CONFIG_SPL_LIBCOMMON_SUPPORT=y
8 CONFIG_SPL_LIBGENERIC_SUPPORT=y
9 CONFIG_NR_DRAM_BANKS=3
10 CONFIG_ENV_SIZE=0x2000
11 CONFIG_ENV_OFFSET=0x0
12 CONFIG_DM_GPIO=y
13 CONFIG_DEFAULT_DEVICE_TREE="imx8-giedi"
14 CONFIG_SPL_TEXT_BASE=0x100000
15 CONFIG_TARGET_GIEDI=y
16 CONFIG_SPL_MMC=y
17 CONFIG_SPL_SERIAL=y
18 CONFIG_SPL_DRIVERS_MISC=y
19 CONFIG_SPL=y
20 CONFIG_ENV_OFFSET_REDUND=0x2000
21 CONFIG_IDENT_STRING=" ##v01.07"
22 CONFIG_SPL_LOAD_IMX_CONTAINER=y
23 CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
24 CONFIG_REMAKE_ELF=y
25 CONFIG_SYS_LOAD_ADDR=0x80280000
26 CONFIG_OF_BOARD_SETUP=y
27 CONFIG_OF_SYSTEM_SETUP=y
28 CONFIG_BOOTDELAY=3
29 CONFIG_AUTOBOOT_KEYED=y
30 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
31 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
32 CONFIG_AUTOBOOT_KEYED_CTRLC=y
33 CONFIG_USE_BOOTCOMMAND=y
34 CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
35 CONFIG_LOG=y
36 CONFIG_BOARD_EARLY_INIT_F=y
37 CONFIG_SPL_BOARD_INIT=y
38 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
39 CONFIG_SPL_SEPARATE_BSS=y
40 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
41 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
42 CONFIG_SPL_POWER_DOMAIN=y
43 CONFIG_SPL_WATCHDOG=y
44 CONFIG_HUSH_PARSER=y
45 CONFIG_SYS_PROMPT="U-Boot# "
46 CONFIG_CMD_CPU=y
47 # CONFIG_BOOTM_NETBSD is not set
48 # CONFIG_CMD_EXPORTENV is not set
49 # CONFIG_CMD_IMPORTENV is not set
50 # CONFIG_CMD_CRC32 is not set
51 CONFIG_CMD_CLK=y
52 CONFIG_CMD_DM=y
53 CONFIG_CMD_FUSE=y
54 CONFIG_CMD_GPIO=y
55 CONFIG_CMD_I2C=y
56 CONFIG_CMD_MMC=y
57 CONFIG_CMD_READ=y
58 CONFIG_CMD_DHCP=y
59 CONFIG_CMD_MII=y
60 CONFIG_CMD_PING=y
61 CONFIG_CMD_CACHE=y
62 CONFIG_CMD_EXT2=y
63 CONFIG_CMD_EXT4=y
64 CONFIG_CMD_FAT=y
65 CONFIG_CMD_FS_GENERIC=y
66 CONFIG_SPL_OF_CONTROL=y
67 CONFIG_ENV_OVERWRITE=y
68 CONFIG_ENV_IS_IN_MMC=y
69 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
70 CONFIG_SYS_MMC_ENV_PART=2
71 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
72 CONFIG_NET_RANDOM_ETHADDR=y
73 CONFIG_SPL_DM=y
74 CONFIG_BOOTCOUNT_LIMIT=y
75 CONFIG_BOOTCOUNT_ENV=y
76 CONFIG_SPL_CLK=y
77 CONFIG_CLK_IMX8=y
78 CONFIG_CPU=y
79 CONFIG_MXC_GPIO=y
80 CONFIG_DM_I2C=y
81 CONFIG_SYS_I2C_IMX_LPI2C=y
82 CONFIG_LED=y
83 CONFIG_LED_GPIO=y
84 CONFIG_MISC=y
85 CONFIG_SUPPORT_EMMC_BOOT=y
86 CONFIG_MMC_IO_VOLTAGE=y
87 CONFIG_MMC_UHS_SUPPORT=y
88 CONFIG_MMC_HS400_SUPPORT=y
89 CONFIG_FSL_USDHC=y
90 CONFIG_PHYLIB=y
91 CONFIG_MV88E61XX_SWITCH=y
92 CONFIG_MV88E61XX_CPU_PORT=5
93 CONFIG_MV88E61XX_PHY_PORTS=0x7
94 CONFIG_MV88E61XX_FIXED_PORTS=0x0
95 CONFIG_DM_ETH=y
96 CONFIG_FEC_MXC_SHARE_MDIO=y
97 CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
98 CONFIG_FEC_MXC=y
99 CONFIG_MII=y
100 CONFIG_PINCTRL=y
101 CONFIG_SPL_PINCTRL=y
102 CONFIG_PINCTRL_IMX8=y
103 CONFIG_POWER_DOMAIN=y
104 CONFIG_IMX8_POWER_DOMAIN=y
105 CONFIG_DM_REGULATOR=y
106 CONFIG_DM_REGULATOR_FIXED=y
107 CONFIG_DM_REGULATOR_GPIO=y
108 CONFIG_SPL_DM_REGULATOR_GPIO=y
109 CONFIG_DM_SERIAL=y
110 CONFIG_FSL_LPUART=y
111 CONFIG_DM_THERMAL=y
112 CONFIG_IMX_SCU_THERMAL=y
113 # CONFIG_SPL_WDT is not set
114 CONFIG_SPL_TINY_MEMSET=y
115 # CONFIG_EFI_LOADER is not set