ls1046ardb_qspi*: Enable RAMBOOT_PBL
[platform/kernel/u-boot.git] / configs / flea3_defconfig
1 CONFIG_ARM=y
2 CONFIG_SYS_DCACHE_OFF=y
3 CONFIG_TARGET_FLEA3=y
4 CONFIG_SYS_TEXT_BASE=0xA0000000
5 CONFIG_NR_DRAM_BANKS=1
6 CONFIG_ENV_SIZE=0x10000
7 CONFIG_ENV_SECT_SIZE=0x10000
8 CONFIG_SYS_I2C_MXC_I2C1=y
9 CONFIG_SYS_I2C_MXC_I2C2=y
10 CONFIG_SYS_I2C_MXC_I2C3=y
11 CONFIG_SYS_LOAD_ADDR=0x80800000
12 CONFIG_FIT=y
13 CONFIG_OF_BOARD_SETUP=y
14 CONFIG_BOOTDELAY=3
15 # CONFIG_DISPLAY_BOARDINFO is not set
16 CONFIG_BOARD_EARLY_INIT_F=y
17 CONFIG_HUSH_PARSER=y
18 CONFIG_SYS_PROMPT="flea3 U-Boot > "
19 CONFIG_CMD_IMLS=y
20 CONFIG_CMD_I2C=y
21 CONFIG_CMD_SPI=y
22 # CONFIG_CMD_SETEXPR is not set
23 CONFIG_CMD_DHCP=y
24 CONFIG_CMD_MII=y
25 CONFIG_CMD_PING=y
26 CONFIG_CMD_CACHE=y
27 CONFIG_CMD_MTDPARTS=y
28 CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
29 CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
30 CONFIG_ENV_OVERWRITE=y
31 CONFIG_ENV_IS_IN_FLASH=y
32 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
33 CONFIG_ENV_ADDR=0xA0080000
34 CONFIG_ENV_ADDR_REDUND=0xA0090000
35 CONFIG_MXC_GPIO=y
36 CONFIG_SYS_I2C_LEGACY=y
37 CONFIG_SYS_I2C_MXC=y
38 CONFIG_SYS_MXC_I2C3_SLAVE=0xfe
39 # CONFIG_MMC is not set
40 CONFIG_MTD=y
41 CONFIG_MTD_NOR_FLASH=y
42 CONFIG_FLASH_CFI_DRIVER=y
43 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
44 CONFIG_FLASH_CFI_MTD=y
45 CONFIG_SYS_FLASH_PROTECTION=y
46 CONFIG_SYS_FLASH_CFI=y
47 CONFIG_MTD_RAW_NAND=y
48 CONFIG_NAND_MXC=y
49 CONFIG_PHYLIB=y
50 CONFIG_PHY_MICREL=y
51 CONFIG_PHY_MICREL_KSZ8XXX=y
52 CONFIG_MII=y
53 CONFIG_MXC_UART=y
54 CONFIG_SPI=y
55 CONFIG_MXC_SPI=y
56 CONFIG_OF_LIBFDT=y
57 CONFIG_FDT_FIXUP_PARTITIONS=y