2 CONFIG_ARCH_OMAP2PLUS=y
3 CONFIG_SYS_TEXT_BASE=0x80100000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_SYS_MALLOC_F_LEN=0x2000
9 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
13 CONFIG_SPL_MMC_SUPPORT=y
14 CONFIG_SPL_SERIAL_SUPPORT=y
15 CONFIG_BOOTCOUNT_BOOTLIMIT=3
16 CONFIG_NR_DRAM_BANKS=1
18 CONFIG_ENV_OFFSET_REDUND=0x2E0000
20 CONFIG_SPL_LIBDISK_SUPPORT=y
21 CONFIG_SPL_SPI_FLASH_SUPPORT=y
22 CONFIG_SPL_SPI_SUPPORT=y
23 CONFIG_ENV_VARS_UBOOT_CONFIG=y
26 CONFIG_SYS_CONSOLE_INFO_QUIET=y
27 # CONFIG_DISPLAY_BOARDINFO is not set
28 CONFIG_ARCH_MISC_INIT=y
29 CONFIG_SPL_I2C_SUPPORT=y
31 CONFIG_SPL_WATCHDOG_SUPPORT=y
32 CONFIG_SPL_YMODEM_SUPPORT=y
33 # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
35 CONFIG_SYS_PROMPT="U-Boot# "
36 CONFIG_AUTOBOOT_KEYED=y
37 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
38 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
41 # CONFIG_CMD_FLASH is not set
48 # CONFIG_CMD_SETEXPR is not set
56 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
57 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),512k(u-boot.env0),512k(u-boot.env1),512k(mtdoops),-(rootfs)"
59 # CONFIG_DOS_PARTITION is not set
62 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
63 CONFIG_ENV_IS_IN_NAND=y
64 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
65 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
66 CONFIG_BOOTCOUNT_LIMIT=y
67 CONFIG_BOOTCOUNT_ENV=y
73 CONFIG_SPI_FLASH_WINBOND=y
74 CONFIG_MTD_UBI_FASTMAP=y
75 CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
77 CONFIG_DRIVER_TI_CPSW=y
81 CONFIG_USB_MUSB_HOST=y
82 CONFIG_USB_MUSB_GADGET=y
83 CONFIG_USB_MUSB_DSPS=y
86 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
87 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
88 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
89 CONFIG_USB_GADGET_DOWNLOAD=y