configs/dns325_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_SYS_DCACHE_OFF=y
   4 CONFIG_ARCH_CPU_INIT=y
   5 CONFIG_ARCH_KIRKWOOD=y
   6 CONFIG_SYS_KWD_CONFIG="board/d-link/dns325/kwbimage.cfg"
   7 CONFIG_SYS_TEXT_BASE=0x600000
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_TARGET_DNS325=y
  10 CONFIG_ENV_SIZE=0x20000
  11 CONFIG_ENV_OFFSET=0xE0000
  12 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325"
  13 CONFIG_IDENT_STRING="\nD-Link DNS-325"
  14 CONFIG_SYS_LOAD_ADDR=0x800000
  15 # CONFIG_SYS_MALLOC_F is not set
  16 CONFIG_BOOTDELAY=3
  17 CONFIG_USE_BOOTCOMMAND=y
  18 CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv; then echo Loaded environment ${bootenv} from usb;run importbootenv;fi;if test -n ${bootenvcmd}; then echo Running bootenvcmd ...;run bootenvcmd;fi;fi;run setnandbootenv subbootcmd;"
  19 CONFIG_USE_PREBOOT=y
  20 CONFIG_CONSOLE_MUX=y
  21 # CONFIG_DISPLAY_BOARDINFO is not set
  22 CONFIG_RESET_PHY_R=y
  23 CONFIG_HUSH_PARSER=y
  24 CONFIG_SYS_MAXARGS=32
  25 # CONFIG_CMD_FLASH is not set
  26 CONFIG_CMD_IDE=y
  27 CONFIG_CMD_NAND=y
  28 CONFIG_CMD_USB=y
  29 # CONFIG_CMD_SETEXPR is not set
  30 CONFIG_CMD_DHCP=y
  31 CONFIG_CMD_MII=y
  32 CONFIG_CMD_PING=y
  33 CONFIG_CMD_EXT2=y
  34 CONFIG_CMD_FAT=y
  35 CONFIG_CMD_JFFS2=y
  36 CONFIG_CMD_MTDPARTS=y
  37 CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
  38 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
  39 CONFIG_CMD_UBI=y
  40 CONFIG_ISO_PARTITION=y
  41 CONFIG_OF_CONTROL=y
  42 CONFIG_ENV_OVERWRITE=y
  43 CONFIG_ENV_IS_IN_NAND=y
  44 CONFIG_NETCONSOLE=y
  45 CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
  46 CONFIG_DM=y
  47 CONFIG_SYS_ATA_STRIDE=4
  48 CONFIG_SYS_ATA_DATA_OFFSET=0x100
  49 CONFIG_SYS_ATA_REG_OFFSET=0x100
  50 CONFIG_SYS_ATA_ALT_OFFSET=0x100
  51 CONFIG_KIRKWOOD_GPIO=y
  52 # CONFIG_MMC is not set
  53 CONFIG_MTD=y
  54 CONFIG_MTD_RAW_NAND=y
  55 CONFIG_MVGBE=y
  56 CONFIG_MII=y
  57 CONFIG_DM_RTC=y
  58 CONFIG_RTC_MV=y
  59 CONFIG_SYS_NS16550=y
  60 CONFIG_USB=y
  61 CONFIG_USB_EHCI_HCD=y
  62 CONFIG_USB_STORAGE=y