Convert CONFIG_SYS_KWD_CONFIG to Kconfig
[platform/kernel/u-boot.git] / configs / dns325_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_SYS_DCACHE_OFF=y
4 CONFIG_ARCH_CPU_INIT=y
5 CONFIG_ARCH_KIRKWOOD=y
6 CONFIG_SYS_KWD_CONFIG="board/d-link/dns325/kwbimage.cfg"
7 CONFIG_SYS_TEXT_BASE=0x600000
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_TARGET_DNS325=y
10 CONFIG_ENV_SIZE=0x20000
11 CONFIG_ENV_OFFSET=0xE0000
12 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325"
13 CONFIG_IDENT_STRING="\nD-Link DNS-325"
14 # CONFIG_SYS_MALLOC_F is not set
15 CONFIG_SYS_LOAD_ADDR=0x800000
16 CONFIG_BOOTDELAY=3
17 CONFIG_USE_BOOTCOMMAND=y
18 CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv; then echo Loaded environment ${bootenv} from usb;run importbootenv;fi;if test -n ${bootenvcmd}; then echo Running bootenvcmd ...;run bootenvcmd;fi;fi;run setnandbootenv subbootcmd;"
19 CONFIG_USE_PREBOOT=y
20 CONFIG_CONSOLE_MUX=y
21 # CONFIG_DISPLAY_BOARDINFO is not set
22 CONFIG_HUSH_PARSER=y
23 # CONFIG_CMD_FLASH is not set
24 CONFIG_CMD_IDE=y
25 CONFIG_CMD_NAND=y
26 CONFIG_CMD_USB=y
27 # CONFIG_CMD_SETEXPR is not set
28 CONFIG_CMD_DHCP=y
29 CONFIG_CMD_MII=y
30 CONFIG_CMD_PING=y
31 CONFIG_CMD_EXT2=y
32 CONFIG_CMD_FAT=y
33 CONFIG_CMD_JFFS2=y
34 CONFIG_CMD_MTDPARTS=y
35 CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
36 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
37 CONFIG_CMD_UBI=y
38 CONFIG_ISO_PARTITION=y
39 CONFIG_OF_CONTROL=y
40 CONFIG_ENV_OVERWRITE=y
41 CONFIG_ENV_IS_IN_NAND=y
42 CONFIG_NETCONSOLE=y
43 CONFIG_DM=y
44 # CONFIG_MMC is not set
45 CONFIG_MTD=y
46 CONFIG_MTD_RAW_NAND=y
47 CONFIG_MVGBE=y
48 CONFIG_MII=y
49 CONFIG_DM_RTC=y
50 CONFIG_RTC_MV=y
51 CONFIG_SYS_NS16550=y
52 CONFIG_USB=y
53 CONFIG_USB_EHCI_HCD=y
54 CONFIG_USB_STORAGE=y