Merge git://git.denx.de/u-boot-video
[platform/kernel/u-boot.git] / configs / display5_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_TARGET_DISPLAY5=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_SPL_SPI_FLASH_SUPPORT=y
11 CONFIG_SPL_SPI_SUPPORT=y
12 CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5"
13 CONFIG_FIT=y
14 CONFIG_SPL_LOAD_FIT=y
15 CONFIG_OF_BOARD_SETUP=y
16 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
17 CONFIG_SUPPORT_RAW_INITRD=y
18 CONFIG_SPL=y
19 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
20 CONFIG_SPL_DMA_SUPPORT=y
21 CONFIG_SPL_ENV_SUPPORT=y
22 CONFIG_SPL_SAVEENV=y
23 CONFIG_SPL_I2C_SUPPORT=y
24 CONFIG_SPL_OS_BOOT=y
25 CONFIG_HUSH_PARSER=y
26 CONFIG_SYS_PROMPT="display5 > "
27 CONFIG_CMD_BOOTZ=y
28 # CONFIG_CMD_ELF is not set
29 CONFIG_CMD_ASKENV=y
30 CONFIG_CRC32_VERIFY=y
31 CONFIG_CMD_EEPROM=y
32 CONFIG_CMD_GPIO=y
33 CONFIG_CMD_I2C=y
34 CONFIG_CMD_MMC=y
35 CONFIG_CMD_PART=y
36 CONFIG_CMD_SF=y
37 CONFIG_CMD_SPI=y
38 CONFIG_CMD_DHCP=y
39 CONFIG_CMD_MII=y
40 CONFIG_CMD_PING=y
41 CONFIG_CMD_CACHE=y
42 CONFIG_CMD_TIME=y
43 CONFIG_CMD_EXT2=y
44 CONFIG_CMD_EXT4=y
45 CONFIG_CMD_FAT=y
46 CONFIG_CMD_FS_GENERIC=y
47 CONFIG_CMD_MTDPARTS=y
48 CONFIG_MTDIDS_DEFAULT="nor0=02008000.spi.1"
49 CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),8m(lin-recovery),4m(swu-kernel),8m(swu-initramfs),-(reserved)"
50 CONFIG_EFI_PARTITION=y
51 # CONFIG_SPL_EFI_PARTITION is not set
52 CONFIG_OF_CONTROL=y
53 CONFIG_ENV_IS_IN_SPI_FLASH=y
54 CONFIG_SPI_FLASH=y
55 CONFIG_SPI_FLASH_BAR=y
56 CONFIG_SPI_FLASH_SPANSION=y
57 CONFIG_SPI_FLASH_STMICRO=y
58 CONFIG_PHYLIB=y
59 CONFIG_PHY_MARVELL=y
60 CONFIG_NETDEVICES=y
61 CONFIG_FEC_MXC=y
62 # CONFIG_SPL_DM_SERIAL is not set
63 CONFIG_MXC_UART=y
64 CONFIG_MXC_SPI=y