configs/corvus_defconfig

   1 CONFIG_ARM=y
   2 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   3 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   4 CONFIG_ARCH_AT91=y
   5 CONFIG_SYS_TEXT_BASE=0x72000000
   6 CONFIG_TARGET_CORVUS=y
   7 CONFIG_SPL_GPIO_SUPPORT=y
   8 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   9 CONFIG_SPL_LIBGENERIC_SUPPORT=y
  10 CONFIG_SYS_MALLOC_F_LEN=0x800
  11 CONFIG_SPL_SERIAL_SUPPORT=y
  12 CONFIG_SPL=y
  13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
  14 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
  15 CONFIG_BOOTDELAY=3
  16 CONFIG_USE_BOOTARGS=y
  17 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
  18 # CONFIG_DISPLAY_BOARDINFO is not set
  19 CONFIG_BOARD_EARLY_INIT_F=y
  20 CONFIG_SPL_NAND_SUPPORT=y
  21 CONFIG_HUSH_PARSER=y
  22 CONFIG_SYS_PROMPT="U-Boot> "
  23 # CONFIG_CMD_BDI is not set
  24 CONFIG_CMD_BOOTZ=y
  25 # CONFIG_CMD_IMI is not set
  26 CONFIG_CMD_DFU=y
  27 CONFIG_CMD_GPIO=y
  28 # CONFIG_CMD_LOADS is not set
  29 CONFIG_CMD_NAND=y
  30 CONFIG_CMD_USB=y
  31 # CONFIG_CMD_SOURCE is not set
  32 # CONFIG_CMD_SETEXPR is not set
  33 CONFIG_CMD_DHCP=y
  34 CONFIG_CMD_PING=y
  35 CONFIG_CMD_MTDPARTS=y
  36 CONFIG_OF_CONTROL=y
  37 CONFIG_OF_EMBED=y
  38 CONFIG_ENV_IS_IN_NAND=y
  39 CONFIG_CLK=y
  40 CONFIG_CLK_AT91=y
  41 CONFIG_DFU_NAND=y
  42 # CONFIG_MMC is not set
  43 CONFIG_MTD_PARTITIONS=y
  44 CONFIG_NAND=y
  45 CONFIG_NAND_ATMEL=y
  46 CONFIG_PHYLIB=y
  47 CONFIG_ATMEL_USART=y
  48 CONFIG_USB=y
  49 CONFIG_USB_EHCI_HCD=y
  50 CONFIG_USB_STORAGE=y
  51 CONFIG_USB_GADGET=y
  52 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
  53 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
  54 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
  55 CONFIG_USB_GADGET_ATMEL_USBA=y
  56 CONFIG_USB_GADGET_DOWNLOAD=y
  57 # CONFIG_EFI_LOADER is not set