configs/corvus_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
   3 CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
   4 CONFIG_SYS_THUMB_BUILD=y
   5 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   6 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   7 CONFIG_ARCH_AT91=y
   8 CONFIG_SYS_TEXT_BASE=0x72000000
   9 CONFIG_TARGET_CORVUS=y
  10 CONFIG_SPL_GPIO=y
  11 CONFIG_SPL_LIBCOMMON_SUPPORT=y
  12 CONFIG_SPL_LIBGENERIC_SUPPORT=y
  13 CONFIG_SYS_MALLOC_F_LEN=0x800
  14 CONFIG_NR_DRAM_BANKS=1
  15 CONFIG_ENV_OFFSET=0x100000
  16 CONFIG_SYS_MALLOC_LEN=0x460000
  17 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
  18 CONFIG_SPL_TEXT_BASE=0x300000
  19 CONFIG_SPL_SERIAL=y
  20 CONFIG_SPL=y
  21 CONFIG_ENV_OFFSET_REDUND=0x180000
  22 CONFIG_SYS_LOAD_ADDR=0x70000000
  23 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
  24 CONFIG_BOOTDELAY=3
  25 CONFIG_USE_BOOTARGS=y
  26 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
  27 # CONFIG_DISPLAY_BOARDINFO is not set
  28 CONFIG_BOARD_EARLY_INIT_F=y
  29 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  30 CONFIG_SPL_NAND_SUPPORT=y
  31 CONFIG_SPL_NAND_DRIVERS=y
  32 CONFIG_SPL_NAND_ECC=y
  33 CONFIG_SPL_NAND_BASE=y
  34 CONFIG_HUSH_PARSER=y
  35 CONFIG_SYS_PROMPT="U-Boot> "
  36 # CONFIG_CMD_BDI is not set
  37 CONFIG_CMD_BOOTZ=y
  38 # CONFIG_CMD_IMI is not set
  39 CONFIG_CMD_DFU=y
  40 CONFIG_CMD_GPIO=y
  41 # CONFIG_CMD_LOADS is not set
  42 CONFIG_CMD_NAND=y
  43 CONFIG_CMD_USB=y
  44 # CONFIG_CMD_SOURCE is not set
  45 # CONFIG_CMD_SETEXPR is not set
  46 CONFIG_CMD_DHCP=y
  47 CONFIG_CMD_PING=y
  48 CONFIG_CMD_MTDPARTS=y
  49 CONFIG_DOS_PARTITION=y
  50 CONFIG_OF_CONTROL=y
  51 CONFIG_ENV_IS_IN_NAND=y
  52 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  53 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  54 CONFIG_CLK=y
  55 CONFIG_CLK_AT91=y
  56 CONFIG_DFU_NAND=y
  57 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
  58 CONFIG_AT91_GPIO=y
  59 # CONFIG_MMC is not set
  60 CONFIG_MTD=y
  61 CONFIG_MTD_RAW_NAND=y
  62 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  63 CONFIG_NAND_ATMEL=y
  64 CONFIG_PHYLIB=y
  65 CONFIG_ATMEL_USART=y
  66 CONFIG_USB=y
  67 CONFIG_USB_EHCI_HCD=y
  68 CONFIG_USB_GADGET=y
  69 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
  70 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
  71 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
  72 CONFIG_USB_GADGET_ATMEL_USBA=y
  73 CONFIG_USB_GADGET_DOWNLOAD=y